Resumo em Inglês:

The objective of this study was to compare the completion rates and performance of the Brazilian version of the Oral Health Impact Profile (OHIP14) when applied as an interview or in its original self-reported form. A convenience sample of 74 adult patients was selected in a Dental Clinic (University of Araras, Brazil). One examiner administered the instrument in both formats to participants with an interval of 2 weeks between each administration. Data about dental health condition and socioeconomic status were collected and associated with total OHIP14 scores in both formats using linear regression analyses. No differences were found in the total scores and in each subscale of the OHIP14 according to the form of administration. Higher values of completion were found in the interview format. More severe impacts were recorded in the interview format than in the questionnaire format. Higher values of total OHIP-14 scores in both formats were related to the presence of dental caries. Total OHIP14 scores were not influenced by the method of administration. However, the use of the OHIP14 in the questionnaire format may result in lower completion rates and loss of data.

Resumo em Inglês:

It is evident from literature that an increased body mass index (BMI) may be a potential risk factor for periodontitis. Association between BMI and periodontitis has been ascribed to unhealthy dietary patterns with insufficient micronutrients and excess sugar and fat content. The present study population has been plagued by unhealthy nutritional practices, hence the present study intended to assess the relation between BMI and periodontal status among green marble mine laborers of Kesariyaji, in the Udaipur district of Rajasthan, India. The study sample comprised of 513 subjects aged 18-54 years, drawn using the stratified cluster sampling procedure. BMI was calculated as the ratio of the subject's body weight (in kg) to the square of their height (in meters). Periodontal status was recorded using the Community Periodontal Index (CPI). Binary multiple logistic regression analysis was executed to assess the relation between body mass index and periodontitis. The dependent variable for logistic regression analysis was categorized into control group (scores 0 - 2 of the CPI) and periodontitis group (scores 3 and 4 of the CPI). The overall prevalence of periodontal disease was 98.2%. Caries status and mean number of teeth present deteriorated with the poor periodontal status. Subjects had an increased risk of periodontitis by 57% for each 1kg/m² increase in the body mass index, which means that a higher body mass index could be a potential risk factor for periodontitis among the adults aged 18 to 54 years. In conclusion, evaluation of the body mass index could be used in periodontal risk assessment.

Resumo em Inglês:

The main objective of the study was to determine the oral hygiene levels and periodontal status among Jain monks attending a Chaturmass in Udaipur, India. To date, no study has been conducted on Jain monks. The study comprises of 180 subjects and the overall response rate was 76% among them. Oral hygiene status was assessed by the Simplified Oral Hygiene Index (OHI-S) of Greene, Vermillion14 (1964), and periodontal status was assessed by the Community Periodontal Index. Additional information was collected regarding food habits, education level and oral hygiene habits. Analysis of variance (ANOVA), Chi Square Test and Step-wise multiple linear regression analysis were carried out using SPSS Software (11.0). The results showed that the oral hygiene status of Jain monks was poor and only 5.6% of the subjects had good oral hygiene. Overall periodontal disease prevalence was 100% with bleeding and shallow pocket contributing a major part (72.8%) among all the age groups (p < 0.001). Multiple linear regression analysis revealed that oral hygiene habits, caloric intake and education level explained a variance of 11.7% for the Oral hygiene index collectively. The findings confirmed that Jain monks have poor oral hygiene and an increased prevalence of periodontal disease compared to that of the similarly aged general population because, as a part of their religion, many Jain individuals avoid brushing their teeth especially during fasting, keeping in mind not to harm the microorganisms present in the mouth.

Resumo em Inglês:

Increasing the quality of the services provided in a Dental School can raise the satisfaction level of patients and consequently increase the level of their oral health. This study was conducted to evaluate the quality of dental care and services provided to patients referred to a Dental School in Kerman, Iran. In this qualitative study, face-to-face, in-depth interviews were conducted with 41 participants #&091;25 patients (P), 5 nurses (N), 6 dental academic staff (AS), and 5 dental students (S)#&093;. Then, the interviews were transcribed and analyzed, using content analysis of data. Data analysis in qualitative research involves breaking down the data and searching for codes and categories that are then reassembled to form themes. Both positive and negative themes emerged. Positive themes included: good infection control, service accessibility, patient appointments and visits were not assigned on merit, precise examinations, and comprehensive treatment plans. Negative themes included: long wait time, lack of options to pass waiting time, such as newspapers and television, an insufficient number of nurses, and not enough professors for supervision. In addition, the results of this study show that the patients and dental staff have high expectations in relation to dental services, and that implementation of these expectations would increase the overall satisfaction with and the quality of the level of services. Finally, some recommendations for improving services in the Kerman Dental School were given to the managing team of the Dental School.

Resumo em Inglês:

The purpose of this study was to evaluate the effect of 5% sodium bicarbonate on the adherence of Candida albicans to thermally activated acrylic resin. Fifty 4 mm² specimens of acrylic resin were obtained using a metallic matrix. The specimens received chemical polishing, were sterilized and then immersed in Sabouraud broth, inoculated with Candida albicans standardized suspension. After 24 hours of incubation at 37ºC, the specimens were divided into four groups according to the substance used for disinfection (5% sodium bicarbonate, 0.12% digluconate chlorhexidine, vinegar and Corega Tabs). A control group was included, in which distilled water was used. The adhered microorganisms were dispersed, diluted and plated onto culture media to determine the number of colony-forming units (cfu/mL). The results were analyzed through the Mann-Whitney statistical test at the 5% level of significance. Only 0.12% digluconate chlorhexidine and 5% sodium bicarbonate presented a statistically significant difference (p = 0.0010 and p = 0.0156, respectively) compared to the control group, decreasing the number of cfu/mL. However, when the different disinfecting solutions were compared with each other, only 0.12% digluconate chlorhexidine presented a statistically significant difference in the reduction of cfu/mL. It was concluded that although 0.12% digluconate chlorhexidine was more effective in the reduction of Candida albicans adherence values to thermally activated acrylic resin, 5% sodium bicarbonate also proved to be a viable alternative.

Resumo em Inglês:

The purpose of this study was to assess color alteration of the paints used for iris painting in artificial eyes. Five disks of heat cured acrylic resin were confectioned by microwave energy for each paint analyzed, in a total of 40 specimens. Each specimen consisted of a colorless acrylic resin disk and another of equal size, of scleral white colored acrylic resin, with the painting interposed between the two disks. The specimens were submitted to an accelerated aging process in a chamber under ultraviolet radiation for 1,008 hours. To assess color variation, a reflective spectrophotometer was used. The results were statistically analyzed by ANOVA and the Tukey test (p < 0.05). All the paints underwent chromatic alteration. The oil paint presented the highest resistance to accelerated aging.

Resumo em Inglês:

The aim of this work was to study the immunohistochemical expression of androgen receptor, estrogen receptor and progesterone receptor in pleomorphic adenomas, Warthin's tumors, mucoepidermoid carcinomas and adenoid cystic carcinomas of salivary glands. A total of 41 pleomorphic adenomas, 30 Warthin's tumors, 30 mucoepidermoid carcinomas and 30 adenoid cystic carcinomas were analyzed, and the immunohistochemical expression of these hormone receptors were assessed. It was observed that all cases were negative for estrogen and progesterone receptors. Androgen receptor was positive in 2 cases each of pleomorphic adenoma, mucoepidermoid carcinoma and adenoid cystic carcinoma. In conclusion, the results do not support a role of estrogen and progesterone in the tumorigenesis of pleomorphic adenomas, Warthin's tumors, mucoepidermoid carcinomas and adenoid cystic carcinomas. However, androgen receptors can play a role in a small set of salivary gland tumors, and this would deserve further studies.

Resumo em Inglês:

This study aimed at comparing amounts of nickel (Ni) and chromium (Cr) released from brackets from different manufacturers in simulated oral environments. 280 brackets were equally divided into 7 groups according to manufacturer. 6 groups of brackets were stainless steel, and 1 group of brackets was made of a cobalt-chromium alloy with low Ni content (0.5%). International standard ISO 10271/2001 was applied to provide test methods. Each bracket was immersed in 0.5 ml of synthetic saliva (SS) or artificial plaque fluid (PF) over a period of 28 days at 37ºC. Solutions were replaced every 7 days, and were analyzed by spectrometry. The Kruskal-Wallis test was applied. Amounts of Ni release in SS (µg L-1 per week) varied between groups from "bellow detection limits" to 694, and from 49 to 5,948.5 in PF. The group of brackets made of cobalt-chromium alloy, with the least nickel content, did not release the least amounts of Ni. Amounts of Cr detected in SS and in PF (µg L-1 per week) were from 1 to 10.4 and from 50.5 to 8,225, respectively. It was therefore concluded that brackets from different manufacturers present different corrosion behavior. Further studies are necessary to determine clinical implications of the findings.

Resumo em Inglês:

This study aimed to compare in vitro the shear bond strength between metallic brackets (Abzil) with conventional mesh bases and metallic brackets with bases industrially sandblasted with aluminum oxide using three adhesive systems, in order to assess the influence of sandblasting on adhesiveness and to compare 3 different bonding systems. Two hundred and forty bovine incisors were used and randomly divided into 6 groups (40 teeth in each group), according to the bracket base and to the bonding system. The brackets were direct-bonded in bovine teeth with 3 adhesive systems: System A - conventional TransbondTM XT (3M - Unitek); System B - TransbondTM Plus Self Etching Primer + TransbondTM XT (3M - Unitek) and System C - Fuji ORTHO LC resin-reinforced glass ionomer cement in capsules (GC Corp.). Shear bond strength tests were performed 24 hours after bonding, in a DL-3000 universal testing machine (EMIC), using a load cell of 200 kgf and a speed of 1 mm/min. The results were submitted to statistical analysis and showed no significant difference between conventional and sandblasted bracket bases. However, comparison between the bonding systems presented significantly different results. System A (14.92 MPa) and system C (13.24 MPa) presented statistically greater shear bond strength when compared to system B (10.66 MPa). There was no statistically significant difference between system A and system C.

Resumo em Inglês:

The present study aimed at analyzing and comparing longitudinally the EMG (electromyographic activity) of the superior orbicularis oris muscle according to the breathing mode. The sample, 38 adolescents with Angle Class II Division 1 malocclusion with predominantly nose (PNB) or mouth (PMB) breathing, was evaluated at two different periods, with a two-year interval between them. For that purpose, a 16channel electromyography machine was employed, which was properly calibrated in a PC equipped with an analogue-digital converter, with utilization of surface, passive and bipolar electrodes. The RMS data (root mean square) were collected at rest and in 12 movements and normalized according to time and amplitude, by the peak value of EMG, in order to allow comparisons between subjects and between periods. Comparison of the muscle function of PNB and PMB subjects at period 1 (P1), period 2 (P2) and the variation between periods (Δ) did not reveal statistically significant differences between groups (p < 0.05). However, longitudinal evaluation of the muscle function in PNB and PMB subjects demonstrated different evolutions in the percentage of required EMG for accomplishment of the movements investigated. It was possible to conclude that there are differences in the percentage of electric activity of the upper lip with the growth of the subjects according to the breathing mode.

Resumo em Inglês:

The objective of this study was to evaluate children's respiratory patterns in the mixed dentition, by means of acoustic rhinometry, and its relation to the upper arch width development. Fifty patients were examined, 25 females and 25 males with mean age of eight years and seven months. All of them were submitted to acoustic rhinometry and upper and lower arch impressions to obtain plaster models. The upper arch analysis was accomplished by measuring the interdental transverse distance of the upper teeth, deciduous canines (measurement 1), deciduous first molars (measurement 2), deciduous second molars (measurement 3) and the first molars (measurement 4). The results showed that an increased left nasal cavity area in females means an increased interdental distance of the deciduous first molars and deciduous second molars and an increased interdental distance of the deciduous canines, deciduous first and second molars in males. It was concluded that there is a correlation between the nasal cavity area and the upper arch transverse distance in the anterior and mid maxillary regions for both genders.

Resumo em Inglês:

This study evaluated the effect of breast- and bottle-feeding duration on the age of pacifier use persistence. Questionnaires (n = 723) with information on nutritive and nonnutritive sucking habits of children aged 3-6 years were assessed. The sample was divided according to breastfeeding duration: G1 - non-breastfed, G2 - up to 3 months, G3 - discontinued between 4 and 6 months, G4 - discontinued between 7 and 12 months, and G5 - longer than 12 months. The children were also assigned to 4 groups by age of pacifier use persistence, as well as by age of bottle-feeding persistence: no habits, up to 2 years, 3-4 years and 5-6 years. Associations between nutritive sucking habits and pacifier use were analyzed using logistic regression. The larger breastfeeding groups were G2 (37.9%) and G4 (19.4%). Many children discontinued pacifier use and bottle-feeding at 3-4 years of age (24.9% and 40.1%, respectively). Chances of non-breastfed children (G1) with prolonged pacifier-sucking habits, in the three age ranges, were progressively higher in comparison with group G4 (OR: 4.0-7.5, p < 0.01). When comparing bottle-fed with non bottle-fed children, the age range at which bottle-feeding had been discontinued was significantly associated with that of pacifier use cessation: up to 2 years (OR = 6.2), 3-4 years (OR = 7.6) and 5-6 years (OR = 27.0), p < 0.01. It may be suggested that breastfeeding duration has an inversely proportional effect on the age of pacifier use persistence. Bottle-fed children who use pacifiers tend to discontinue these habits at the same period.

Resumo em Inglês:

The aim of this study was to assess the microhardness of 5 glass ionomer cements (GIC) - Vidrion R (V, SS White), Fuji IX (F, GC Corp.), Magic Glass ART (MG, Vigodent), Maxxion R (MR, FGM) and ChemFlex (CF, Dentsply) - in the presence or absence of a surface protection treatment, and after different storage periods. For each GIC, 36 test specimens were made, divided into 3 groups according to the surface protection treatment applied - no protection, varnish or nail varnish. The specimens were stored in distilled water for 24 h, 7 and 30 days and the microhardness tests were performed at these times. The data obtained were submitted to the ANOVA for repeated measures and Tukey tests (α = 5%). The results revealed that the mean microhardness values of the GICs were, in decreasing order, as follows: F > CF = MR > MG > V; that surface protection was significant for MR, at 24 h, without protection (64.2 ± 3.6a), protected with GIC varnish (59.6 ± 3.4b) and protected with nail varnish (62.7 ± 2.8ab); for F, at 7 days, without protection (97.8 ± 3.7ab), protected with varnish (95.9 ± 3.2b) and protected with nail varnish (100.8 ± 3.4a); and at 30 days, for F, without protection (98.8 ± 2.6b), protected with varnish (103.3 ± 4.4a) and protected with nail varnish (101 ± 4.1ab) and, for V, without protection (46 ± 1.3b), protected with varnish (49.6 ± 1.7ab) and protected with nail varnish (51.1 ± 2.6a). The increase in storage time produced an increase in microhardness. It was concluded that the different GICs, surface protection treatments and storage times could alter the microhardness values.

Resumo em Inglês:

The aim of this randomized clinical trial study was to evaluate the therapeutic effect of two varnish formulations (G1 = 5% NaF, G2 = 6% NaF + 6% CaF2) on the remineralization of white spot lesions (WSL). The sample was composed of 15 (7- to 12-year-old) children with 45 active WSL in anterior permanent teeth. The children were randomly divided into two groups providing 22 lesions for G1 and 23 for G2. The children were submitted to weekly varnish applications 4 times. The WSL were evaluated twice: baseline and on week 4. Maximum lesion dimensions (mesiodistal and incisogingival) were measured in millimeters and classified in four grades of size. WSL were also assessed regarding lesion activity by one calibrated examiner. The Pearson chi-square and Fisher's exact tests were used (P < 0.01). WSL reductions were observed in both varnish groups (Chi-square = 0.15, d.f. = 1, P = 0.90), and with similar magnitude (in mm): 1.19 and 1.29 for G1 and G2, respectively. Thirty-six WSL (15 in G1 and 21 in G2) were classified as inactive on week 4, reaching an overall value of 80%. No difference was observed between G1 and G2 regarding activity scores (Fisher's exact test, p > 0.01). It was concluded that after 4 applications the two varnish formulations tested produced similar clinical effects, indicating the reduction and the control of carious activity in most WSL.

Resumo em Inglês:

This study investigated the association of IL-1A (+4845) and IL-1B (+3954) gene polymorphism with the subgingival microbiota and periodontal status of HIV-infected Brazilian individuals on highly active antiretroviral therapy (HAART). One hundred and five subjects were included in the study, distributed into 2 HIV groups [29 chronic periodontitis (CP+) and 30 periodontally healthy (H+)]; and 2 non-HIV groups (29 CP- and 17 H- patients). IL-1A and B were genotyped by PCR and restriction enzyme digestion. Thirty-three bacterial species were detected by checkerboard. Overall, we observed a prevalence of the allele 2 in the IL1-A and IL-1B polymorphism at 30.5% and 25.7%, respectively. Only 11.4% of all patients were composite genotype-positive, and 75% of those were HIV-infected. No significant associations between polymorphism of the IL-1 gene and periodontitis or HIV infection were observed. Likewise, no significant differences in the frequency and counts of any bacterial species were found between individuals with and without allele 2 (IL-1A or IL-1B). The data indicated that the IL-1 gene polymorphism is neither associated with periodontal destruction nor with high levels of subgingival species, including putative periodontal pathogens in HIV Brazilian individuals on HAART.

Resumo em Inglês:

This study aimed at morphometrically evaluating the influence of variable caloric values of ethanol consumption on alveolar bone loss in periodontitis in male rats. Thirty-six male rats were randomized into four groups of nine rats each, as follows: Test group A (low) - rats were fed an ethanol-containing liquid diet (ethanol representing 22% of total caloric value); Control group A -rats were fed a pair-fed control diet (ethanol replaced by isocaloric amounts of carbohydrate); Test group B (high) -rats were fed an ethanol-containing liquid diet (ethanol representing 36% of total caloric value); Control group B -rats were fed a pair-fed control diet for Test B. Following anesthesia, cotton ligatures were placed around the cervix of the right upper second molar. At eight weeks, the maxillary bones were removed and alveolar bone loss was analyzed by measuring the distance between the cementoenamel junction and the alveolar bone crest at buccal and palatal sites of the upper second molar. The unligated groups showed no significant differences between the bone loss values observed for the low and high caloric values of ethanol (p > 0.05). In the ligated groups, the rats receiving low caloric values of ethanol showed significantly greater bone loss compared to the isocaloric rats (p < 0.05); however, the rats receiving high caloric values of ethanol showed no significant differences compared to the controls. Analysis of the results demonstrated that, in male rats, ethanol itself affected ligature-induced bone loss when representing a low value in the total caloric value.

Resumo em Inglês:

This study analyzed the influence of polymerization cycle and post-pressing time on tooth movement in complete dentures. Forty maxillary complete dentures were fabricated and randomly assigned to 8 groups (n = 5); the polymerization cycle (conventional long cycle in water bath, fast cycle in boiling water, and by microwave energy) and the post-pressing time (immediate and 6 hours) were varied. Metal reference pins were placed on the incisal border of the central incisors (RI and LI), on the buccal cusp of the first premolars (RP and LP), and on the mesiobuccal cusp of the second molars (RM and LM). Two transverse and 2 anteroposterior distances were measured with a linear optical microscope (Olympus Optical Co., Tokyo, Japan) with an accuracy of .0005 mm, before and after processing the complete dentures. The data collected were submitted to analysis of variance (ANOVA) and the Tukey Test at a significance level of 5%. When Clássico, a conventional heat-polymerizable acrylic resin, was polymerized by microwave energy, tooth movement was statistically significant for 2 distances, with the highest value being observed for the 6-hour post-pressing time. Onda-Cryl microwave acrylic resin processed by microwave energy presented the lowest tooth movement for 2 distances, considering the 6-hour post-pressing time. QC-20 acrylic resin presented no statistically significant change considering both post-pressing times in each distance evaluated. Tooth movement showed an asymmetric behavior, so the mastering of the processing method is essential to the precise execution of all laboratory steps, irrespective of the polymerization cycle and post-pressing time used.

Resumo em Inglês:

The aim of this study was to evaluate the effect of light-curing devices (Halogen/HAL, Light Emitting Diodes/LED, Argon Laser/LAS and Plasma Arc/PAC) and aging procedures (Mechanical Cycling/MC, Thermal Cycling/TC, Storage/S, MC+TC and MC+TC+S) on the micro-hardness of bottom/B and top/T surfaces of 2-mm-high composite resin cylinders. The Knoop microhardness test (25 g, 20 s) on both B and T was performed before and after each aging procedure. For B and T, before aging procedures, PAC showed reduced polymerization effectiveness when compared with HAL. In the T, after TC, PAC and LAS had also showed reduced polymerization effectiveness when compared to HAL and LED. For all light-curing devices, MC+TC+S and S affected the Knoop microhardness values. In the B, no difference could be observed among the aging procedures for PAC. From all light-curing units, PAC may have rendered composites of reduced quality and the storage aging procedures were the most harmful to the polymer hardness.