Acessibilidade / Reportar erro

Produção de painéis laminados unidirecionais - LVL com lâminas de Schizolobium amazonicum, Eeucalyptus saligna e Pinus taeda

Production of laminated veneer lumber LVL using veneer of Schizolobium amazonicum, Eucalyptus saligna and Pinus taeda

Resumos

Objetivou-se, nesta pesquisa, avaliar a qualidade dos painéis laminados unidirecionais (LVL) produzidos com lâminas de Schizolobium amazonicum (paricá), Eucalyptus saligna e Pinus taeda. Foram produzidos em laboratório painéis LVL com sete lâminas de 2,0 mm de espessura com diferentes composições utilizando resina fenol-formaldeído. As lâminas de paricá foram préclassificadas em diferentes classes de módulo de elasticidade dinâmico (MOEd) através do uso de "stress wave machine". As lâminas de Eucalyptus saligna e Pinus taeda foram utilizadas nas capas dos painéis com objetivo de reforçar a resistência estrutural dos painéis LVL. Foram avaliadas as propriedades de resistência da linha de cola aos esforços de cisalhamento (RLC) e flexão estática (MOE e MOR, edge e flat). A classificação de lâminas de paricá com base nas classes de MOEd não influenciou de forma significativa nos resultados de resistência da linha de cola, MOE e MOR edge. Para o MOE e MOR flat, a utilização de lâminas com MOEd classe 1, contribuiu de forma significativa para o aumento nos valores médios destas propriedades. Da mesma forma, a utilização de lâminas de Eucalyptus saligna nas faces do painel contribuiu para o aumento nos valores médios de MOE e MOR, edge e flat.

Lâminas de madeira; paricá; compensados


This research evaluated the quality of laminated veneer lumber -LVL manufactured with veneers of Schizolobium amazonicum (paricá), Eucalyptus saligna and Pinus taeda. The LVL panels were manufactured in the laboratory conditions composed by seven veneers, 2,0 mm thickness, with different structural compositions, using phenol-formaldehyde resin. The veneers of Schizolobium amazonicum- paricá- were pre-classified by using stress wave machine. The veneers of Eucalyptus saligna and Pinus taeda were disposed in the face layer to reinforce the structural strength of LVL panels. The LVL quality was evaluated using glue line shear strength and static bending test (MOE and MOR, edge and flat). Grading of paricá veneers based on MOEd did not affected significantly the results of the glue line shear strength and MOE and MOR edge. For the MOE and MOR flat, the use of veneers of MOEd grade 1 contributed significantly to increasing the average values of these properties. In the same way, using the Eucalyptus saligna veneers on the face of LVL resulted in higher average values of MOE and MOR, edge and flat.

Wood veneers; paricá; plywood


Produção de painéis laminados unidirecionais - LVL com lâminas de Schizolobium amazonicum, Eeucalyptus saligna e Pinus taeda

Production of laminated veneer lumber LVL using veneer of Schizolobium amazonicum, Eucalyptus saligna and Pinus taeda

Setsuo IwakiriI; Jorge Luis Monteiro de MatosI; Juliana Afonso PintoII; Lívia Cássia VianaIII; Marina Moura de SouzaIV; Rosilani TrianoskiII; Vanessa Coelho AlmeidaIII

IEngenheiro Florestal, Professor Dr. em Engenharia Florestal – Departamento de Engenharia e Tecnologia Florestal/DETF – Universidade Federal do Paraná/UFPR – Av. Lothário Meissner, 900 – Jardim Botânico – 80210-170 – Curitiba, PR – setsuo@ufpr.br, jmatos@ufpr.br

IIEngenheira Industrial Madeireira, Mestrando em Engenharia Florestal – Universidade Federal do Paraná – Av. Lothário Meissner, 900 – 80210-170 – Curitiba, PR – ju_sebaio@yahoo.com.br, rosillani@gmail.com

IIIEngenheira Florestal, Doutoranda em Engenharia Florestal – Universidade Federal do Paraná – Av. Lothário Meissner, 900 – 80210-170 – Curitiba, PR – licvianna@hotmail.com, vanessaufrrj@yahoo.com.br

IVEngenheira Florestal, Mestre em Engenharia Florestal – Universidade Federal do Paraná – Av. Lothário Meissner, 900 – 80210-170 – Curitiba, PR –mourafloresta@yahoo.com.br

RESUMO

Objetivou-se, nesta pesquisa, avaliar a qualidade dos painéis laminados unidirecionais (LVL) produzidos com lâminas de Schizolobium amazonicum (paricá), Eucalyptus saligna e Pinus taeda. Foram produzidos em laboratório painéis LVL com sete lâminas de 2,0 mm de espessura com diferentes composições utilizando resina fenol-formaldeído. As lâminas de paricá foram préclassificadas em diferentes classes de módulo de elasticidade dinâmico (MOEd) através do uso de "stress wave machine". As lâminas de Eucalyptus saligna e Pinus taeda foram utilizadas nas capas dos painéis com objetivo de reforçar a resistência estrutural dos painéis LVL. Foram avaliadas as propriedades de resistência da linha de cola aos esforços de cisalhamento (RLC) e flexão estática (MOE e MOR, edge e flat). A classificação de lâminas de paricá com base nas classes de MOEd não influenciou de forma significativa nos resultados de resistência da linha de cola, MOE e MOR edge. Para o MOE e MOR flat, a utilização de lâminas com MOEd classe 1, contribuiu de forma significativa para o aumento nos valores médios destas propriedades. Da mesma forma, a utilização de lâminas de Eucalyptus saligna nas faces do painel contribuiu para o aumento nos valores médios de MOE e MOR, edge e flat.

Palavras-chave: Lâminas de madeira, paricá, compensados.

ABSTRACT

This research evaluated the quality of laminated veneer lumber -LVL manufactured with veneers of Schizolobium amazonicum (paricá), Eucalyptus saligna and Pinus taeda. The LVL panels were manufactured in the laboratory conditions composed by seven veneers, 2,0 mm thickness, with different structural compositions, using phenol-formaldehyde resin. The veneers of Schizolobium amazonicum- paricá- were pre-classified by using stress wave machine. The veneers of Eucalyptus saligna and Pinus taeda were disposed in the face layer to reinforce the structural strength of LVL panels. The LVL quality was evaluated using glue line shear strength and static bending test (MOE and MOR, edge and flat). Grading of paricá veneers based on MOEd did not affected significantly the results of the glue line shear strength and MOE and MOR edge. For the MOE and MOR flat, the use of veneers of MOEd grade 1 contributed significantly to increasing the average values of these properties. In the same way, using the Eucalyptus saligna veneers on the face of LVL resulted in higher average values of MOE and MOR, edge and flat.

Key words: Wood veneers, paricá, plywood.

Texto completo disponível apenas em PDF.

Full text available only in PDF format.

6 REFERÊNCIAS BIBLIOGRÁFICAS

Recebido: 17 de dezembro de 2009

Aceito: 30 de agosto de 2010

  • BALDWIN, R. F. Plywood and veneer-based products: manufacturing practices. San Francisco: M. Freeman, 1993. 388 p.
  • BENDSTEN, B. A. Properties of wood from improved and managed trees. In: ECONIMICS & FINANCIAL MANAGEMENT AND TIMBER PRODUCTION TECHNICAL COMITTEES OF THE FOREST PRODUCTS RESEARCH SOCIETY, 1., 1978, Atlanta. Proceedings... Atlanta: FPRS, 1978. p. 78-121.
  • BODIG, J.; JAYNE, B. A. Mechanics of wood and wood composites. New York: V.N. Reinhold, 1982. 711 p.
  • EUROPEAN STANDARD. EN 310: determination of modulus of elasticity in bending and of bending strength. Lisboa, 2002.
  • EUROPEAN STANDARD. EN 314-1: plywood, bonding quality, part 1: test methods. Bruxelas, 2004.
  • IWAKIRI, S. Painéis de madeira reconstituída. Curitiba: FUPEF, 2005. 247 p.
  • IWAKIRI, S.; MATOS, J. L. M.; TORQUATO, L. P.; BRONOSKI, M.; NISHIDATE, M. M. Produção de painéis laminados unidirecionais: LVL com madeira de Eucalyptus grandis Hill ex Maiden e Eucalyptus dunnii Maiden. Floresta e Ambiente, Seropédica, v. 15, n. 2, p. 1-7, 2008.
  • IWAKIR, S.; SHIMOYAMA, V. R. S.; PEDROSA, A. L.; ANJOS, R. A. M. Efeito do crescimento radial de Pinus taeda L. nas propriedades do painel compensado. Cerne, Lavras, v. 9, n. 1, p. 90-96, 2002.
  • MARRA, A. A. Technology of wood bonding: principles in practice. New York: V.N. Reinhold, 1992. 453 p.
  • MATOS, J. L. M. Estudos sobre a produção de painéis estruturais de lâminas paralelas de Pinus taeda L. 1997. 117 p. Tese (Doutorado em Ciências Florestais) - Universidade Federal do Paraná, Curitiba, 1997.
  • PEASE, D. A. Panels: products, applications and production trends. New York: M. Freeman, 1994. 254 p.
  • PIO, N. S. Produção de painéis estruturais de lâminas paraleleas (PLP) de Eucalyptus grandis Hill ex-Maiden. 2002. 174 p. Tese (Doutorado em Ciências Florestais) Universidade Federal do Paraná, Curitiba, 2002.
  • SOCIEDADE BRASILEIRA DE SILVICULTURA. Fatos e números do Brasil Florestal 2006 São Paulo, 2007. Disponível em: <http://www.sbs.org.br> . Acesso em: 12 jan. 2009.
  • TSOUMIS, G. Science and technology of wood: stucture, properties and utilization. New York: V.N. Reinhold, 1991. 494 p.

Datas de Publicação

  • Publicação nesta coleção
    23 Set 2014
  • Data do Fascículo
    Dez 2010

Histórico

  • Aceito
    30 Ago 2010
  • Recebido
    17 Dez 2009
UFLA - Universidade Federal de Lavras Universidade Federal de Lavras - Departamento de Ciências Florestais - Cx. P. 3037, 37200-000 Lavras - MG Brasil, Tel.: (55 35) 3829-1706, Fax: (55 35) 3829-1411 - Lavras - MG - Brazil
E-mail: cerne@dcf.ufla.br