Accessibility / Report Error
(Updated: 2023/08/17)

About the journal

Basic Information

 

The objective of the scientific publication Brazilian Journal of Food Technology (BJFT) is to publish results of original research and technological information that contributed to the dissemination of new knowledge related to food production and assessment in the areas of food science, technology, engineering and nutrition (not clinical). Original scientific articles, review articles and scientific notes should be published in English.

The journal is supported by the Institute of Food Technology (Ital) of the Secretariat of Agriculture and Food Supply of the São Paulo State Government. The first issue was published in 1998, as an evolution of the endogenous journal called "Ital´s Collection", created in 1965.

The Journal BJFT became an electronic publication in a continuous flow, starting in 2016, with free access, whose content can be accessed for free online at SciELO and: http://bjft.ital.sp.gov.br/ with no registration.

The Brazilian Journal of Food Technology, in line with current and good national and international scientific communication practices, started its process of joining Open Science in 2022.

The short title of the periodical is Braz. J. Food Technol., which should be used in bibliographies, footnotes, captions and bibliographic references.

 

 

Indexed in

 

Articles published in Brazilian Journal of Food Technology are indexed or abstracted by:
 

 

 

Long-term archiving

 

The Brazilian Journal of Food Technology (BJFT) is committed to ensuring long-term access to all of its digital content. After acceptance, the articles are made available to the public on the BJFT page and on the SciELO website.

 

 

Copyright

 

All articles published on Brazilian Journal of Food Technology is copyrighted to the authors and the journal has the right of first publication including photographs that can be used to promote the article through social media. The articles are licensed under Creative Commons License CC BY 4.0 open-access license.

 

 

Disclosure

 

The Brazilian Journal of Food Technology periodically issues articles published on social networks such as Facebook (@revistaBJFT), since June 2018 and Twitter (@revistaBJFT), since January 2019 and Instagram (@revistaBJFT), since January 2023.. It also produces journalistic texts for the SciELO in Perspective blog and for other scientific vehicles for dissemination. The altimetry of each article can be followed on the SciELO website.

logo da rede social facebook          logo da rede social twitter          

 

 

Institutional support

 

BJFT is supported by Institute of Food Technology - Ital, linked to the Agency for Agribusiness Technology, the Secretariat of Agriculture and Supply of São Paulo State.

 

 

Editorial Board

Editors

 

Editor-in-chief 

Assistant Editor

Section Editors

 

 

Associated Editors

   

 

Editorial Advisory Board

   

 

Editorial Production

 

Web Design and Support

  • Carlos Eduardo S. Domingues
    Instituto de Tecnologia de Alimentos/GTI - Grupo de Tecnologia da Informação, Campinas/SP-Brasil

Electronic Editing

  • Editora Cubo

Language Review/ English and Portuguese

  • Editora Cubo

Bibliographic Revision

  • Editora Cubo

Secretary/Operations Coordinator

  • Gabriela S. Noronha - ITAL/DG, Campinas/SP-BR

Information Management Analyst

  • Míriam G. Marquezini - ITAL/CTC, Campinas/SP-BR

Media & Public Affairs Coordinator

  • Fabiana Sabadini Rezende Niglio - ITAL/CTC, Campinas/SP-BR

Logo Brazilian Journal of Food Technology

  • Patrícia Citrângulo - ITAL/CETEA, Campinas/SP-BR
 

 


 

Instructions to authors

 

Scope and Editorial Policy

 

The mission of this Journal is to contribute to the development of Food Science and Technology for the benefit of society, with the publication and dissemination of original research results in this area of knowledge.

The Brazilian Journal of Food Technology is an electronic rolling pass publication, free accessed, whose scope is the publication of unpublished papers. The articles must be based on original results of research, and technological information that contribute to the dissemination of new knowledge related to the food production and evaluation in the areas of science, technology, food engineering and nutrition (non-clinical).

The Journal publishes original papers, review papers, and scientific notes in English. Submission of a manuscript presupposes that the same content has not been published or is under analysis for publication in any other scientific journal. However, the manuscript may have been deposited in Preprints repositories. The content of the paper will be the sole responsibility of the author(s), who will be obliged to provide retractions or corrections of errors, if necessary.

 

 

Open Science

 

The BJFT journal, in line with Open Science practices, encourages authors to deposit their manuscript and supplementary materials (data, program codes, and others), at the time of publication or before it, on Preprint and Data repositories, respectively. Files can be deposited on the SciELO Preprints and SciELO Data repositories. Other equivalent repositories are supported. Authors must inform the data of the documents in the “Open Science Compliance Form”.

The authors may choose one or more means of opening the peer review process offered by the journal. The options are 1) the publication or not of the manuscript approval evaluation opinions if the submitted article is accepted for publication; and 2) direct or non-direct interaction with reviewers responsible for evaluating the manuscript. The authors must inform their options in the “Open Science Compliance Form

The completed “Open Science Compliance Form” must be sent in pdf as a supplementary file in the submission, and the conformity informed by the authors will be verified in the initial revision of the manuscripts and later by the editors and reviewers.

 

 

Code of Ethics

 

Brazilian Journal of Food Technology - BJFT recommends the orientation presented in the “Code of good scientific practice” published by FAPESP - São Paulo Research Foundation. It is extremely important that authors interested in publishing papers in the BJFT attend the requirements described in the item “About the communication of research results and their authorship” of this important publication. Attending the directives presented in the report of the Commission on Integrity in Research of the Brazilian agency CNPq - National Counsel of Technological and Scientific Development is also recommended.

The BJFT editors also follow the directives of COPE – Committee on Publication Ethics and recommend that both authors and reviewers meet the requirements of this publication with respect to their attributions.

The BJFT editors declare that the papers published in this journal are subject to retraction when:

  • there is clear evidence that the results published are not true, be this due to bad scientific conduct or to non-intentional errors/failures.
  • the results have been previously published without citation / reference, permission or appropriate justification.
  • plagiarism was involved.
  • research that did not attend the principles of ethics was reported.

Considering that the peer reviewing process is fundamental to assure the integrity of scientific publications, and that truth, ethics, and responsibility by all those involved are presupposed, it is expected that the reviewers attend the following minimal requirements:

  • to only agree to review articles within their area of knowledge.
  • to respect the confidentiality necessary for the process.
  • to use no information obtained in the review process.
  • to declare any conflict of interest to the editor, be it real or potential, refusing to evaluate the paper if they feel incapable of proceeding with a just and impartial review.
  • not to be influenced by diverse prejudices or commercial interests.
  • to recognize that the involvement of third parties in the review process is considered as serious bad conduct.

Regarding the authors, one expects that they attend the following minimal requirements:

  • to only submit for publication the results of research carried out in an ethical and responsible way, according to the pertinent legislation.
  • to present the results in a clear and honest way, without any type of undue data “fabrication”, falsification or manipulation.
  • to describe the used methods in a clear, non-ambiguous way, such that the results can be confirmed by other researchers.
  • to attend the presupposition that all the authors of the paper contributed individually and truthfully to the carrying out of the research.
  • to attend the presupposition that the article submitted to evaluation is original, with no plagiarism and not published in any other vehicle.
  • to assume the responsibility for the paper submitted / published.
  • to cite and include the due references when using texts and earlier papers of your authorship, avoiding any characterization of auto-plagiarism.
  • to present the results of a single, complex study as a cohesive whole manuscript, instead of fragmenting it into individual manuscripts.
  • to immediately communicate to the editor any error subsequently found in any paper submitted, accepted or published, contributing to the publication of an erratum or retraction when necessary.
  • to attend the presupposition that there is no conflict of interest related to eventual sources of research financing or any other type of relevant conflict.
 

 

Evaluation Process

 

The manuscript submitted for publication in the BJFT is previously evaluated by an Editor. Depending on the general quality of the work, it may be rejected or be returned to the Authors for adjustments or sent to two ad hoc Reviewers. The whole process is a blind review, except for manuscripts whose authors, in line with the actions of Open Science, presented the Preprint deposit of the manuscript and/or opted for opening the review. The reviewers’ evaluations are sent to the Associate Editor, who qualifies the manuscript’s pertinence for publication. In case of discordance between the reviewers, other reviewers may be consulted. If the publication is possible, the reviewers and Associate Editor evaluations are sent to the Authors for them to verify the suggestions and carry out any pertinent modifications, which should be inserted in the text highlighted in a different color. There is no limit for the number of revisions, this is an interactive process and it depends on the agility of the Reviewers and the Editor in issuing their evaluations and on the Authors in returning the reviewed article. At the end of the process, the final decision is up to the Editor in Chief or Area Editor to approve or to reject the manuscript publication, subsided by the Associate Editor's recommendation and the reviewers’ evaluation. This peer review system is the self-regulation mechanism adopted by the Journal to certify the credibility of the research to be published. As part of Open Science actions, when applicable, the names of Editors and Reviewers, as well as part of the review process, will be published along with the article.

The prior evaluation carried out by the Editors considers: Conformation with the scope and norms of the journal; Relevance of the study; Broadness of the focus; Adequacy and reproducibility of the methodology; Adequacy and recentness of the bibliography and Quality of the written word.

The subsequent evaluation by the Reviewers and Editors/ Counsellors considers the originality, scientific quality, relevance, technical aspects of the manuscript including adequacy of the title and quality of the Resumo/Abstract, Introduction, Methodology, Discussion and Conclusions, and the clarity and objectiveness of the text.

When the work presents research results involving the participation of human beings in Brazil, following Brazilian Resolution 466/12 of the National Health Council from Brazil, the project approval number by a Research Ethics Committee must be informed. Articles are published in order of approval, in the Journal’s online version at http://bjft.ital.sp.gov.br and at the Scientific Electronic Library Online (SciELO)

The Brazilian Journal of Food Technology makes use of the Crossref Similarity Check (iThenticate) tool to assess plagiarism, contributing to the safety of published articles.

 

 

Form and preparation of manuscripts

 

1. CONTENT AND CLASSIFICATION OF THE DOCUMENTS FOR PUBLICATION

National and international manuscripts presenting new concepts or experimental approaches and not simply scientific data repositories will be accepted. 

Papers published in the BJFT are classified into these categories.

1.1.ORIGINAL SCIENTIFIC ARTICLES: These are articles that report the methodology, the final results and the conclusions of original research, structured and documented such that they can be reproduced with margins of error equal or below the limits indicated by the author. The work should not have been previously published, except in the preliminary form as a scientific note or a congress abstract.

1.2. REVIEW ARTICLES: These are interrelated extracts from the available literature about a subject that fits into the scope of this journal and which contain conclusions about the available knowledge. They should preferably be based on literature published in the last five years.

1.3. SCIENTIFIC NOTES: These are partial reports of original research which, due to their relevance, justify prior publication. They should follow the same standard as a scientific article and could subsequently be published in the complete form as a Scientific Article.

The manuscripts should be presented in English.

 

2. STYLE AND FORMATTING

2.1. FORMATTING.

- Microsoft WORD 2010 non-protected text editor.
- Source - Arial 12. Do not format the text in multiple columns.
- A4 page format (210 x 297 mm), 2 cm margins.
- All the lines and pages of the manuscript should be numbered in sequence.
- Itemizing of the sections and subsections should not exceed 3 levels.
- The number of pages, including Figures and Tables in the text, should not be greater than 20 for Original Scientific and Review Articles or 9 for other types of document. We suggest that the presentation and discussion of the results be as concise as possible.
- Use short phrases.

2.2. UNITS OF MEASUREMENT: The International Unit System (SI) should be used and the temperature should be expressed in degrees Celsius.

2.3. TABLES & FIGURES: These must be numbered with Arabic numbers in the order they are mentioned in the text. Titles must be immediately above tables and immediately below figures, and must not contain units. Units must be between brackets in tables and figures. Tables must be inserted in the manuscript body soon after being mentioned. Photographs should be designated as figures. The location of tables and figures in the text should be identified.

The TABLES should be edited using the resources of the WORD text editor available for this end, using only horizontal lines. They should be self-explanatory and easy to read and understand. Footnotes should be indicated by lowercase superscript letters. First demarcate the columns and then the lines and follow the same sequence for the footnotes.

The FIGURES should preferably be used to highlight the more expressive results. They should not repeat information found in Tables. They should be presented so as to allow a clear visualization and interpretation of their content. The captions should be short, self-explanatory and with no edges. The Figures (graphs, photos, diagrams, etc.) should be in colour and in high definition (300 dpi), to be easily interpreted. Figures should be in the form of a JPG or TIF file and should be sent (File upload) in individual files, separate from the main text, on submitting the manuscript. These individual files should be named according to the figure number. Example: Fig1.jpg, Fig2.tif etc.

2.4. EQUATIONS: The equations should appear in an editable form and only in the text, that is, they should not be presented as figures or sent in separate files.

We recommend the use equation editor to present equations in the text. Do not mix digital tools in the same equation or mix these resources to insert symbols. Also do not use equation editors to present simple variables in the manuscript text (e.g., a=b2+c2), Greek letters and symbols (e.g., α, _∞, ∆) or mathematical operations (e.g., x, ±, ≥). Whenever possible, when editing the manuscript text, use the tool “insert symbols”.

Tables and Figures should be cited in the text and numbered in increasing sequential order, in Arabic numerals between parentheses, close to the right hand margin.

2.5. ABBREVIATIONS AND ACRONYMS: When strictly necessary, abbreviations and acronyms should be defined the first time they are mentioned. Do not use non-standardized acronyms unless they appear more than 3 times in the text. Abbreviations and acronyms should not appear in the Title, nor, if possible, in the Abstract or Keywords.

2.6. NOMENCLATURE: Reagents and ingredients: preferably use the international nonproprietary name (INN), that is, the official generic name.

Names of species: use the complete name of the genus and species, in italic, in the title (if present) and for the first mention in the manuscript. Subsequently, the first letter of the genus followed by the complete name of the species can be used.

 

3. STRUCTURE OF THE ARTICLE

3.1. COVER PAGE: title, running head, authors/affiliation (It should be submitted as Title Page).

TITLE: This must be clear, accurate, concise (up to 15 words) and identify the main topic of the work. 

RUNNING HEAD: This should be written in uppercase and not exceed 50 characters, including spaces.

AUTHORS & AFFILIATION: Those who made effective intellectual and scientific contributions to the work are considered as authors, as they have participated in the conception, execution, analysis as well as in the writing or interpretation of the results. All authors must approve the final content of the work. If of interest to the authors, other collaborators, such as, for example, sample suppliers and sponsors, can be cited in the acknowledgement section. The corresponding author is responsible for all the communication with the Journal and should provide information about the contribution of each co-author to the development of the study presented.

The complete names of the authors should be supplied in full, followed by their complete affiliation (Institution/Department, city, state or county, country) and electronic address (e-mail). The name of the corresponding author should be indicated, together with the full address for postage purposes.

For the corresponding author:

Complete name (*corresponding author)
Institution/Department (Complete name of the Affiliated Institution when research was carried out)
Full postal address (Address/ postal code / City / State or County / Country)
Telephone
e-mail

For co-authors:

Complete name
Institution/Department (Complete name of the Affiliated Institution when research was carried out)
Address (City / State or County / Country)
e-mail

3.2. MAIN DOCUMENT: title, abstract, highlights, keywords, text of the article with the identification of figures and tables

Original scientific articles and scientific notes must contain the following topics: Title; Abstract; Highlights; Keywords; Introduction, with literature review; Material and Methods; Results and Discussion; Conclusion; Acknowledgements (if any) and References.

Review articles must contain the following topics:  Title; Abstract; Highlights; Keywords; Introduction and development (free); Conclusion; Acknowledgements (if any) and References.

TITLE: This must be clear, precise, concise (up to 15 words) and identify the main topic of the research. Use words useful for indexing and retrieving work. Avoid trade names and abbreviations. If numbers need to be used, these and their units should come in full and in italic: the first letter capitalized for genus and lowercase for species. Include city or country names only when results cannot be generalized to other locations. 

ABSTRACT: This must include the objective(s), material & methods (only information essential to understand how results were obtained), the more significant results and the study conclusions, containing no more than 2000 characters (including spaces). Do not use abbreviations or acronyms.

HIGHLIGHTS: To give the article greater visibility and attractiveness, the journal publishes the article's Highlights. They must contain 3 topics, each with up to 90 characters (including spaces). Each topic should describe an important conclusion or result of the study, presented in the form of a sentence. Highlights must come after the Abstract.

KEYWORDS: A minimum of 6 up to a maximum of 10 words should be included immediately after the Resumo and Abstract, which indicate the content of the work and allow for its recovery in literature searches. Do not use terms that appear in the title. Use words that allow the retrieval of the article in comprehensive searches. Avoid plural terms and multiple concepts (with "and" and "of"), as well as abbreviations, with the exception of those well-established and known in the field.

INTRODUCTION: This must bring together information to give a clear definition of the studied problem, referring to current bibliography, preferably to indexed periodicals, allowing the reader to situate the work and justifying its publication. Aiming to value the Journal, whenever pertinent, the citation of articles published in the BJFT is suggested.

MATERIAL & METHODS: This item must make it possible to reproduce the presented research. The employed methodology must only be written in detail when dealing with development or modification of a method. In the latter case, the modification must be emphasized. All methods must be accompanied by their references.

RESULTS & DISCUSSION: The results must be presented and interpreted, giving emphasis to the important points, which should be discussed based on current knowledge. Avoid duplicating the presentation of results in tables and figures. Whenever possible, the results must be statistically analyzed.

CONCLUSIONS: The essence of the results discussion must be presented in this item, which proves or not the hypothesis of the work or highlights the results importance or contribution to the knowledge advance. This item must not be confused with the summary, nor represent a summary of the discussion.

FUNDING AGENCY: Researchers who have received support from funding agencies must indicate in the publication the complete identification, including their full name, country, grant number and year. The authors are responsible for the veracity and accuracy of this data.

ACKNOWLEDGEMENTS: Contributors who do not meet the criteria for authorship should receive acknowledgments. However, they should consent to their name appearing in the publication. Thanks to people or institutions are optional.

REFERENCES: The Brazilian Journal of Food Technology adopts, since 2019, the style of citations and bibliographical references of the American Psychological Association - APA. The full rule and tutorials can be found at https://apastyle.apa.org/.

The list of references should firstly be written in alphabetical order and then in chronological order, if necessary.

The names of all authors should be listed in the references, so it is not allowed to use the expression "et al.”. This expression must be used only in-text citation.

In-text citation

The bibliographic citations inserted in the text must be done according to the "Author Data" system.

Examples:

1. Only one author: Silva (2017) or (Silva, 2017)
2. Two authors:  Costa & Silveira (2010) or (Costa & Silveira, 2010) 
3. Three or more authors: (Nafees et al., 2014)
4. Author entity: (Sea Turtle Restoration Project, 2006)

In the case of author entity citation, it is mentioned the complete name:
(American Dietetic Association, 1999)

Citation of several documents of the same author, published in the same year, are distinguished by the addition of lowercase letters, in alphabetical order, after the date and without space, according to the list of references.

Examples:

According to Reeside (1927a)
(Reeside, 1927b)

The list of references should follow the established by the American Psychological Association - APA, as follows (https://awc.ashford.edu/cd-apa-reference-models.html):

- Periodical publication (Journal articles)

Dumais, S. A., Rizzuto, T. E., Cleary, J., & Dowden, L. (2013). Stressors and supports for adult online learners: Comparing first- and continuing-generation college students. American Journal of Distance Education, 27(2), 100-110. https://doi.org/10.1080/08923647.2013.783265

Reitzes, D. C., & Mutran, E. J. (2004). The transition to retirement: Stages and factors that influence retirement adjustment. International Journal of Aging and Human Development, 59(1), 63-84. Retrieved from http://journals.sagepub.com/home/ahd

Spagnol, W. A., Silveira Junior, V., Pereira, E., & Guimarães Filho, N. (2018). Monitoramento da cadeia do frio: novas tecnologias e recentes avanços. Brazilian Journal of Food Technology, 21, e2016069. Recuperado em 03 de dezembro de 2018, de http://www.scielo.br/scielo.php?script=sci_arttext&pid=S1981-67232018000100300&lng=en&nrm=iso&tlng=pt

Leão, P. R. P. d., Medina, A. L., Vieira, M. A., & Ribeiro, A. S. (2018).
Decomposição de amostras de cerveja com sistema de refluxo para determinação monoelementar por F AAS/AES e determinação multielementar por MIP OES. Brazilian Journal of Food Technology, 21, 1-11.http://dx.doi.org/10.1590/1981-6723.6217

Books

Jans, N. (1993). The last light breaking: Life among Alaska's Inupiat Eskimos. Anchorage, AK: Alaska Northwest Books.

Miller, J., & Smith, T. (Eds.). (1996). Cape Cod stories: Tales from Cape Cod, Nantucket, and Martha's Vineyard. San Francisco, CA: Chronicle Books.
    For a single editor, use "(Ed.)".

Arking, R. (2006). The biology of aging: Observations and principles (3rd ed.). New York, NY: Oxford University Press.

Meilgaard, M., Vance Civillie, G., & Thomas Carr, B. (1999). Sensory evaluation techniques (464 p.). Leeds: CRC Press.  http://dx.doi.org/10.1201/9781439832271

E-book

Chaffe-Stengel, P., & Stengel, D. (2012). Working with sample data: Exploration and inference. https://doi.org/10.4128/9781606492147

Miller, L. (2008). Careers for nature lovers & other outdoor types. Retrieved from http://www.ebscohost.com

- Chapters of books

Haybron, D. M. (2008). Philosophy and the science of subjective well-being. In M. Eid & R. J. Larsen (Eds.), The science of subjective well-being (pp. 17-43). New York: Guilford Press.

Quina, K., & Kanarian, M. A. (1988). Continuing education. In P. Bronstein & K. Quina (Eds.), Teaching a psychology of people: Resources for gender and sociocultural awareness (pp. 200-208). Retrieved from http://www.ebscohost.com/academic/psycinfo.

 - Technical Standards

Associação Brasileira de Normas Técnicas. (2011). Alumínio e suas ligas - Chapa lavrada para piso - Requisitos (ABNT NBR 15963:2011). Rio de Janeiro: Autor.

ASTM International. (2009). Standard specification for polyethylene terephthalate film and sheeting (D5047-17). West Conshohocken: Author.

- Legislation (Ordinances, decrees, resolutions, laws)

Brasil. Ministério da Agricultura, Pecuária e Abastecimento. (2014, fevereiro 21). Regulamenta a Lei no 7.678, de 8 de novembro de 1988, que dispõe sobre a produção, circulação e comercialização do vinho e derivados da uva e do vinho (Decreto nº 8.198, de 20 de fevereiro de 2014).  Diário Oficial [da] República Federativa do Brasil, Brasília.

Brasil. Ministério da Saúde. Agência Nacional de Vigilância Sanitária – ANVISA. (2001, maio 15). Aprova o Regulamento Técnico - Critérios Gerais e Classificação de Materiais para Embalagens e Equipamentos em Contato com Alimentos constante do Anexo desta Resolução (Resolução - RDC nº 91, de 11 de maio de 2001). Diário Oficial [da] República Federativa do Brasil. Retrieved from: http://portal.anvisa. gov.br/documents/10181/2718376/(1)RDC_91_2001_COMP.pdf/fb132262-e0a1-4a05-8ff7-bc9334c18ad3

European Union. (2014). European Commission’s Directorate General Health and Consumers. Guidance notes on the classification of a United States of America, 108(40), 16819-16824. http://dx.doi.org/10.1073/pnas.1016644108. PMid:21949380

European Union. (2006). Commission Regulation (EC) No 1881/2006 of 19 December 2006 setting maximum levels for certain contaminants in foodstuffs, L 364/5–L 364/24. Official Journal of the European Union, Bruxelas.

- Patents

Flamme, E., & Bom, D. C. (2011). U.S. Patent No. WO 2011/067313, A1. Washington, DC: Patent Cooperation Treaty.

 

 

AUTHORSHIP

 

Authors are considered those with effective intellectual and scientific contribution to the work, participating in its conception, execution, analysis, interpretation or writing of the results, approving its final content. Authorship also implies responsibility for all aspects of the work and a commitment to collaborate in the investigation and resolution of issues related to the accuracy or integrity of any part of the work. If there is interest from the authors, other collaborators who do not meet these requirements, such as suppliers of inputs and samples, those who helped to obtain resources and infrastructure and sponsors, should be mentioned in the acknowledgments section. The order of authorship must be a joint decision of the authors. For the journal, the corresponding author is the responsible for the work and must inform the contribution of each co-author to the development of the study according to the taxonomy CRediT.

With regard to the authors, one expects that they attend the following minimal requirements:

  • to only submit for publication the results of research carried out in an ethical and responsible way, according to the pertinent legislation;
  • to present the results in a clear and honest way, without any type of undue data “fabrication”, falsification or manipulation;
  • to describe the used methods in a clear, non-ambiguous way, such that the results can be confirmed by other researchers;
  • to attend the presupposition that all the authors of the paper contributed individually and truthfully to the carrying out of the research;
  • to attend the presupposition that the article submitted to evaluation is original, with no plagiarism and not published in any other vehicle;
  • to assume the responsibility for the paper submitted / published;
  • to cite and include the due references when using texts and earlier papers of your authorship, avoiding any characterization of auto-plagiarism;
  • to present the results of a single, complex study as a cohesive whole manuscript, instead of fragmenting it into individual manuscripts;
  • to immediately communicate to the editor any error subsequently found in any paper submitted, accepted or published, contributing to the publication of an erratum or retraction when necessary;
  • to attend the presupposition that there is no conflict of interest related to eventual sources of research financing or any other type of relevant conflict.
 

 

Manuscript Submission

 

Submission of the article is online by the ScholarOne system, accessing the link: https://mc04.manuscriptcentral.com/bjft-scielo

If you are not a user of ScholarOne, open an account in the system via Create an Account on the Log in screen. On opening an account, note the fields marked with “req.” since they are obligatory. If you are a user but have forgotten your password, use the Reset Password on the same screen.

If you have any doubts on using the system, use the tutorial (Resources - Help / Site Support) below Log in on the screen. If necessary use the Help button on the upper extreme right of the page.

During submission, do not use the back button of the navigator.

A cover letter for the manuscript must be submitted online via ScholarOne, describing the hypothesis, the main message, the novelty of the study, the importance of its contribution to the area, and its suitability for the Brazilian Journal of Food Technology. The author must indicate in the Cover Letter if the manuscript is the result of a defended dissertation or thesis. 

It is mandatory to include the ORCID of the corresponding author when submitting the manuscript. It is recommended that the ORCID of the other authors also be included. ORCID provides a persistent digital identifier (an ORCID ID) that you own and control, and that distinguishes you from all other researchers - https://orcid.org/).

The BJFT journal, in line with Open Science practices, encourages authors to deposit their manuscript in a Preprint repository, as well as supplementary material in a Data repository, at the time of publication, or prior to it. The objective is to facilitate the evaluation of the manuscript, contributing to the preservation and reuse of contents and research, in case of approval for publication.

Manuscripts deposited on the SciELO Preprints repository or equivalent are accepted. Authors must inform the data of the Preprint manuscript in the “Open Science Compliance Form” (document to be completed and attached as a supplementary file at the time of submission).

BJFT encourages its authors to make available all content underlying the text of the manuscript (data, program codes, and other materials), before, or at the time of publication. These contents should be deposited in the SciELO Data repository or equivalent. The information must be included in the “Open Science Compliance Form”.

BJFT recommends that all authors link their ORCID to the preprint and data accounts during the submission process.

Authors may choose one or more means of opening the peer review process offered by the journal. The options are: 1) publication or not of the manuscript approval evaluation opinions, if the submitted article is accepted for publication; and 2) direct or non-direct interaction with reviewers responsible for evaluating the manuscript. The author's options must be informed in the “Open Science Compliance Form”.

The completed “Open Science Compliance Form” must be sent in pdf as a supplementary file in the submission.

 

 

Authors' contributions

 

The BJFT requires declarations of authorship and contribution when submitting articles to ensure adherence to authorship / contribution processes and policies. The BJFT adopted the methodology called Contributor Roles Taxonomy (CRediT) to describe the individual contributions of each author to the work. CRediT´s taxonomy does not determine who qualifies as an author. Authorship is determined by the policy of this journal.

The author who submits the manuscript is responsible for providing the contributions of all authors. All authors of the manuscript should have the opportunity to review and confirm the contributions attributed to them. Each author can be assigned several contributions and a certain contribution can be made by several authors. When several authors play the same role, the degree of contribution should be specified as "main," "equal," or "support."

#

         ROLE

DEFINITION

1

Conceptualization

Ideas; formulation or evolution of overarching research goals and aims.

2

Data curation

Management activities to annotate (produce metadata), scrub data and maintain research data (including software code, where it is necessary for interpreting the data itself) for initial use and later re-use.

3

Formal analysis

Application of statistical, mathematical, computational, or other formal techniques to analyse or synthesize study data.

4

Funding acquisition

Acquisition of the financial support for the project leading to this publication.

5

Investigation

Conducting a research and investigation process, specifically performing the experiments, or data/evidence collection.

6

Methodology

Development or design of methodology; creation of models.

7

Project administration

Management and coordination responsibility for the research activity planning and execution.

8

Resources

Provision of study materials, reagents, materials, patients, laboratory samples, animals, instrumentation, computing resources, or other analysis tools.

9

Software

Programming, software development; designing computer programs; implementation of the computer code and supporting algorithms; testing of existing code components.

10

Supervision

Oversight and leadership responsibility for the research activity planning and execution, including mentorship external to the core team.

11

Validation

Verification, whether as a part of the activity or separate, of the overall replication/reproducibility of results/experiments and other research outputs.

12

Visualization

Preparation, creation and/or presentation of the published work, specifically visualization/data presentation.

13

Writing – original draft

Preparation, creation and/or presentation of the published work, specifically writing the initial draft (including substantive translation).

14

Writing – review & editing

Preparation, creation and/or presentation of the published work by those from the original research group, specifically critical review, commentary or revision – including pre- or post-publication stages.

 

 

Financing

 

The correspondence author must indicate sources of funding for the research project during the submission, indicating the name of the Agency in full, country, scholarship number and year. The authors are responsible for the veracity and accuracy of this data.

 

 

Publication fee

 

Publication fee should be consulted on the Journal's website.

The publication process will start after the payment of the publication fee, whose collection and payment instructions will be sent to the correspondent by Editora Cubo as soon as the manuscript is accepted.

 
Instituto de Tecnologia de Alimentos - ITAL Av. Brasil, 2880, 13070-178 Campinas - SP / Brasil, Tel 55 19 3743-1762 - Campinas - SP - Brazil
E-mail: bjftsec@ital.sp.gov.br