Flux for Hardfacing by Submerged Arc Welding from Ferrochrome-manganese and Slag from the Simultaneous Reduction of Chromite and Pyrolusite

Abstract

The obtaining of a flux for hardfacing by Submerged Arc Welding (SAW), using ferrochrome-manganese and slag obtained from the simultaneous carbothermal reduction of chromite and pyrolusite is addressed. The ferrochrome-manganese and the slag were obtained, conceiving that both products satisfy the requirements of the components (alloy system and matrix) of an agglomerated flux for hardfacing. The fusion-reduction process to obtain the alloy and the slag was carried out in a direct current electric arc furnace. The pouring was carried out into water to facilitate the separation and grinding of the cast products. An experimental flux was manufactured, using the obtained alloy and slag. Deposits were obtained by SAW, which were characterized in terms of: chemical composition, microstructure and hardness. It was concluded that the flux obtained from ferrochrome-manganese and slag from the simultaneous carbothermal reduction of chromite and pyrolusite, allows to deposit an appropriate metal for work under abrasion conditions, characterized by significant carbon and chromium contents and a martensitic microstructure predominantly, with hardness of 63 HRc.

Key-words:
Flux; SAW; Hardfacing; Slag; Ferroalloys