In the current market an increasing quality is demanded to manufacture products. At the odontologic market the composed resins are becoming more and more used to replace old materials, like amalgamates in the aesthetic and functional restorations, since they present a better appearance and easier manuscript. The chemical composition of these materials varies and the results of the chemical reactions of polymerization processes are quite unknown. The aim of this work was to measure the resistance of the abrasive wear of six composed resins sold in Brazilian market when displayed to polymerization periods of 10, 20 and 40 seconds. The grinding disc method appropriated for odontology was used to make this process possible. For this a bank of assays in which a porcelain covered dynamic disc consumes a static disc recovered by the polymerized resin is used to demonstrate the method in a pre-established time. The abrasive wear was determined by the calculation of the aggressiveness (capacity of a material to consume another). This aggressiveness is determined by an initial graph of displacement for time, through the computational method (LabView program). After they have passed through a linear regression the results give as a possibility the angular coefficient, considered a parameter at the calculation of aggressiveness. Higher values of aggressiveness which means a higher aggression suffered by the resin disc indicate worse resistance to the abrasive consuming of this resin in relation to porcelain. The results showed a variable comportment for each material ahead the different polymerization time, which prove the importance in create a practical and fast analyses method to test new materials before their use.
Composite resins; abrasive wear; time of photopolymerization
