Acessibilidade / Reportar erro

Rollover stability of precast concrete beams supported by elastomeric bearing pads

Estabilidade ao tombamento de vigas pré-moldadas sobre aparelho de apoio de neoprene

Abstract

During construction of precast girder bridges, there is the concern on rollover instability of the beams when exclusively supported by elastomeric bearing pads. This type of failure has been the focus of recent research due several accidents reported. However, these studies have not considered the nonlinear behavior of elastomeric bearing pads and the lift-off effect. Therefore, this paper presents a parametric study with a finite element model calibrated with experimental results, reported in the literature, through a nonlinear geometrical analysis and considering that concrete behaves linearly. Besides, the experimental results are compared to simplified approaches which account the pad nonlinear behavior and the lift-off effect by utilizing its secant rotational stiffness. From the results, the difference between the instability load from nonlinear geometrical analysis and experimental results was 8.7 %, and the simplified eigenvalue solution and experimental was 11.4 %, which was the best fit compared to the other existing analytical models. From the parametrical analysis, the instability load was considerably decreased by varying the initial lateral deflection, the skewed pad rotation, top flange width and the span of the beam.

Keywords:
precast beam; lift-off effect; bearing pads; rollover instability; nonlinear behavior; numerical analysis; eigenvalue analysis.

IBRACON - Instituto Brasileiro do Concreto Instituto Brasileiro do Concreto (IBRACON), Av. Queiroz Filho, nº 1700 sala 407/408 Torre D, Villa Lobos Office Park, CEP 05319-000, São Paulo, SP - Brasil, Tel. (55 11) 3735-0202, Fax: (55 11) 3733-2190 - São Paulo - SP - Brazil
E-mail: arlene@ibracon.org.br