Resumo em Inglês:

Abstract Aim: Polymorphisms in the COMT gene can alter enzymatic functions, raising levels of endogenous catecholamines, which stimulates beta-adrenergic receptors related to pain. This study aimed to evaluate whether a polymorphism in the COMT gene (rs4818) is associated with dental pain in children. Methodology: A cross-sectional study was conducted with a representative sample of 731 pairs of children and parents randomly selected from a population-based sample of eight-year-old children. Reports of dental pain was evaluated using a question directed at the parents and self-reported pain using the Faces Pain Scale – Revised. Dental caries experience was determined using the Decayed, Missing, and Filled Teeth (DMFT) index. For genetic analysis, DNA was obtained from oral mucosa epithelial cells of 352 children randomly selected from the initial sample. Results: Children with the CC genotype had higher odds of reporting moderate to intense pain than those with the GG genotype (OR=3.60; 95% CI=0.80–16.20; p=0.03). These same children had greater odds of parental reports of pain (OR=1.93; 95% CI=0.91-4.08; p=0.02). Moreover, lower schooling of parents/guardians and caries experience in the primary dentition were significantly associated with greater odds of a parental report of dental pain (OR=2.06; 95% CI=1.47–2.91; p<0.001; OR=6.26; 95% CI=4.46–8.78; p<0.001). Conclusions: The rs4818 polymorphism of the COMT gene is associated with dental pain. Children with the C allele are more likely to report higher levels of pain. Clinical Relevance: Even though the experience of pain is subjective and multifactorial, this study raises the hypothesis that there is a genetic predisposition to dental pain that should be considered in clinical practice.

Resumo em Inglês:

Abstract During oral surgery and temporomandibular joint repositioning, pain hypersensitivity often occurs due to irritation or inflammation of the nerve endings in the orofacial region. Objective: This study aimed to investigate the effects of ECa 233, a Centella asiatica–standardized extract, on the development of mechanical hyperalgesia and allodynia induced by chronic constriction injury of the infraorbital nerve in mice. Methodology: The right infraorbital nerves of the mice were ligated. Oral carbamazepine (20 mg/kg) or ECa 233 (30, 100, or 300 mg/kg) was administered daily for 21 days. Von Frey and air-puff tests were performed on both sides of the whisker pad on days 0, 7, 14, and 21. Thereafter, the expression of purinergic receptor subtype 3 (P2X3) and voltage-gated sodium channel 1.7 (NaV1.7), a transmembrane protein, in the trigeminal ganglion and c-fos immunoreactivity-positive neurons in the trigeminal nucleus caudalis was assessed. Results: After 21 days of infraorbital nerve ligation, the mice showed allodynia- and hyperalgesia-like behavior, P2X3 and NaV1.7 were upregulated in the trigeminal ganglion, and nociceptive activity increased in the trigeminal nucleus caudalis. However, the oral administration of carbamazepine (20 mg/kg), ECa 233 (100 mg/kg), or ECa 233 (300 mg/kg) mitigated these effects. Nevertheless, ECa 233 failed to affect NaV1.7 protein expression. Conclusion: Carbamazepine and ECa 233 can prevent pain hypersensitivity in mice. Considering the side effects of the long-term use of carbamazepine, ECa 233 monotherapy or combined ECa 233 and carbamazepine therapy can be used as an alternative for regulating the development of hypersensitivity in trigeminal pain. However, further detailed clinical studies should be conducted to provide comprehensive information on the use of ECa 233.

Resumo em Inglês:

Abstract Objective This retrospective study aimed to analyze the clinical efficacy of two regenerative surgical methods — Bio-Oss granules combined with barrier membranes and Bio-Oss Collagen alone — and to help clinicians achieve better periodontal regeneration outcomes in the specific periodontal condition. Methodology Patients who underwent periodontal regeneration surgery from January 2018 to April 2022 were retrospectively screened, and their clinical and radiographic outcomes at 6 months postoperatively were analyzed. The probing depth (PD), clinical attachment level (CAL), bleeding on probing (BOP), gingival recession (GR), distance from the cemento-enamel junction to the bottom of the bone defect (CEJ-BD), and depth of intrabony defects (INFRA) were recorded before the operation (T0) and 6 months after it (T1), and subsequently compared. Results In total, 143 patients were included — 77 were placed in the Bio-Oss group and 66 were placed in the Bio-Oss Collagen group. All indicators, including PD and CAL at T1, showed significant differences compared to baseline, for both groups (P<0.001). PD reduction was greater in the group receiving the Bio-Oss Collagen treatment (P=0.042). Furthermore, in cases when the baseline PD range was 7-11 mm and the age range was 35-50 years, PD reduction was more significant for patients receiving the Bio-Oss Collagen treatment (P=0.031, 0.023). A linear regression analysis indicated that postoperative PD and CAL were positively correlated with baseline values, and that the efficacy tended to decrease with increasing age. Conclusion Both the use of Bio-Oss Collagen alone and the use of Bio-Oss granules combined with barrier membranes resulted in significant effects in the treatment of periodontal intrabony defects. The Bio-Oss Collagen treatment generated more improvements in PD than the Bio-Oss granules combined with barrier membranes, particularly within the baseline PD range of 7-11 mm and the 35-50 years age group. Additionally, age was the main factor influencing the effectiveness of regenerative surgery for intrabony defects: older individuals exhibited fewer improvements.

Resumo em Inglês:

Abstract Objective: In this study, a comparative evaluation of the physicochemical properties of Cention N and other direct restorative materials was performed. Three restorative materials—a resin-modified glass ionomer (Fuji II LC), an alkasite-based resinous material (Cention N), and a resin composite (Tetric N Ceram)—were characterized in terms of degree of conversion, Knoop hardness number (KHN) ratio, flexural strength, elastic modulus, water sorption, water solubility, microshear bond strength to dentin, immediate microleakage, and radiopacity. Methodology: The microshear bond strength to dentin and microleakage of Cention N were evaluated with and without the application of an adhesive system (Tetric N Bond Universal). A one-way ANOVA test was used to analyze the data in terms of degree of conversion, KHN ratio, water sorption, water solubility, microshear bond strength to dentin, and radiopacity. A two-way ANOVA test (carried out considering the material type and ethanol aging as factors) was used to analyze the data in terms of flexural strength and elastic modulus. The Kruskal–Wallis test was used to statistically analyze the data on microleakage. A significance level of α=0.05 was used for all tests. Results: Fuji II LC was found to have the highest degree of conversion, water sorption, and microleakage, as well as the lowest flexural strength. Cention N had the highest solubility; when used with an adhesive system, it achieved bond strength and microleakage similar to those of the Tetric N Ceram composite. Tetric N Ceram had the highest degree of conversion, KHN ratio, and radiopacity. Conclusion: The properties of Cention N validate its efficacy as an alternative direct restorative material when used in conjunction with an adhesive system.

Resumo em Inglês:

Abstract Objectives This study aimed to analyze the cost-effectiveness of whitening toothpastes and at-home bleaching for the treatment of tooth discoloration. Methodology A cost-effectiveness economic analysis was conducted, and eight randomized clinical trials were selected based on the whitening agent product used: blue covarine dentifrices (BCD), hydrogen peroxide dentifrices (HPD), dentifrices without bleaching agents (CD, negative control), and 10% carbamide peroxide (CP10, positive control) for at-home bleaching. The consumer/patient perspective was adopted, macro-costing techniques were used and a decision tree model was performed considering the costs in the American and Brazilian markets. The color change evaluation (ΔE*ab) was used to calculate the effectiveness of tooth bleaching. A probabilistic analysis was performed using a Monte Carlo simulation and incremental cost-effectiveness ratios were obtained. Results CP10 resulted in the highest cost-effectiveness compared to the use of dentifrices in both markets. In Brazil, HPD was more cost-effective than BCD and CD. In the US, the increased costs of HPD and BCD did not generate any whitening benefit compared to CD. Conclusions CP10 was more cost-effective than BCD and HPD for tooth bleaching from the perspectives of the Brazilian and American markets. Decision-making should consider the use of CP10 for treating tooth discoloration.

Resumo em Inglês:

Abstract Associations between the WNT5A rs566926 variant and non-syndromic orofacial cleft (NSOC) have been reported in different populations. Objective This study aimed to investigate the role of the rs566926 single nucleotide polymorphism (SNP) in WNT5A and its interactions with SNPs in BMP4, FGFR1, GREM1, MMP2, and WNT3 in the occurrence of NSOC in a Brazilian population. Methodology A case-control genetic association study was carried out involving participants from four regions of Brazil, totaling 801 patients with non-syndromic cleft lip with or without cleft palate (NSCL±P), 273 patients with cleft palate only (NSCPO), and 881 health volunteers without any congenital condition (control). Applying TaqMan allelic discrimination assays, we evaluated WNT5A rs566926 in an ancestry-structured multiple logistic regression analysis, considering sex and genomic ancestry as covariates. Interactions between rs566926 and variants in genes involved in the WNT5A signaling pathway (BMP4, FGFR1, GREM1, MMP2, and WNT3) were also explored. Results WNT5A rs566926 was significantly associated with an increased risk of NSCL±P, particularly due to a strong association with non-syndromic cleft lip only (NSCLO), in which the C allele increased the risk by 32% (OR: 1.32, 95% CI: 1.04–1.67, p=0.01). According to the proportions of European and African genomic ancestry, the association of rs566926 reached significant levels only in patients with European ancestry. Multiple interactions were detected between WNT5A rs566926 and BMP4 rs2071047, GREM1 rs16969681 and rs16969862, and FGFR1 rs7829058. Conclusion The WNT5A rs566926 polymorphism was associated with NSCL±P, particularly in individuals with NSCLO and high European ancestry. Epistatic interactions involving WNT5A rs566926 and variants in BMP4, GREM1, and FGFR1 may contribute to the risk of NSCL±P in the Brazilian population.

Resumo em Inglês:

Abstract Objective: We aimed to investigate the regulatory effects of HMGB1/TLR4 signaling pathway on the expression of IL-10 and VEGF in human bone marrow mesenchymal stem cells. Methodology: Human JBMSCs were isolated and cultured. Then, HMGB1 was added into the JBMSCs culture medium, and the protein and mRNA expression levels of IL-10 and VEGF were assessed. Moreover, cells were pretreated with a specific TLR4 inhibitor (TAK-242), and the expression changes of IL-10 and VEGF were compared. Results: Compared with the control group, exposure to HMGB1 in human JBMSCs up-regulated TLR4, IL-10, and VEGF secretion at both protein and mRNA levels (P<0. 05). In addition, the increased expression of IL-10 and VEGF could be restrained in TAK-242 group compared with the HMGB1 group (P<0.05). Conclusions: The results indicated that HMGB1 activate TLR4 signaling pathway in Human JBMSCs, which plays a regulatory role in cytokines expression.

Resumo em Inglês:

Abstract Objective: This study aimed to investigate the effects of systemic administration of P. eurycarpa Yalt. plant extract on alveolar bone loss and oxidative stress biomarkers in gingival tissue in a rat model of experimental periodontitis. Methodology: 32 male Wistar albino rats, weighing 200–250 g, were divided into four groups (n=8): Healthy control (HC), Experimental periodontitis control (EPC), Experimental periodontitis 400 mg/kg (EP400), Experimental periodontitis 800 mg/kg (EP800). Experimental periodontitis was induced using the ligating method. Distilled water was administered to the HC and EPC groups and the plant extract was administered to the EP400 and EP800 groups by oral gavage at doses of 400 mg/kg and 800 mg/kg, respectively. The rats were sacrificed on the 15th day. The values of glutathione peroxidase GSH-Px, malondialdehyde (MDA), superoxide dismustase (SOD), interleukin-1β (IL-1β), interleukin-10 (IL-10), total antioxidant status (TAS), total oxidant status (TOS), oxidative stress index (OSI) in the gingival tissues were analyzed by ELISA tests. Alveolar bone loss was assessed using micro-CT images of the maxilla. Results: Although the IL-1β, TOS, OSI results of the healthy control group were lower than those of the other groups, the TAS values were higher (p<0.05). No significant difference was found in the biochemical parameters among the EPC, EP400, and EP800 groups (p>0.05). Alveolar bone loss was significantly reduced in the extract groups compared to the EPC group (p<0.001). Conclusion: Within the limitations of this study, it was observed that the systemic P. eurycarpa extract application reduced alveolar bone loss in a rat model of experimental periodontitis. Further studies are needed to elucidate the beneficial effects of P. eurycarpa.

Resumo em Inglês:

Abstract Objective: The aim of this population-based retrospective study was to compare the osteogenic effect of newly formed bone after maxillary sinus floor elevation (MSFE) and simultaneous implantation with or without bone grafts by quantitatively analyzing trabecular bone parameters. Methodology: A total of 100 patients with missing posterior maxillary teeth who required MSFE and implantation were included in this study. Patients were divided into two groups: the non-graft group (n=50) and the graft group (n=50). Radiographic parameters were measured using cone beam computed tomography (CBCT), and the quality of newly formed bone was analyzed by assessing trabecular bone parameters using CTAn (CTAnalyzer, SkyScan, Antwerp, Belgium) software. Results: In the selected regions of interest, the non-graft group showed greater bone volume/total volume (BV/TV), bone surface/total volume (BS/TV), trabecular number (Tb. N), and trabecular thickness (Tb. Th) than the graft group (p<0.001). The non-graft group showed lower trabecular separation (Tb. Sp) than the graft group (p<0.001). The incidence of perforation and bleeding was higher in the graft group than in the non-graft group (p<0.001), but infection did not significantly differ between groups (p>0.05). Compared to the graft group, the non-graft group showed lower postoperative bone height, gained bone height and apical bone height (p<0.001). Conclusion: MSFE with and without bone grafts can significantly improve bone formation. In MSFE, the use of bone grafts hinders the formation of good quality bone, whereas the absence of bone grafts can generate good bone quality and limited bone mass.

Resumo em Inglês:

Abstract Objective The present in vitro study incorporated niobium oxyhydroxide fillers into an experimental high-viscosity bulk-fill resin composite to improve its mechanical performance and provide it a bioactive potential. Methodology Scanning electron microscopy synthesized and characterized 0.5% niobium oxyhydroxide fillers, demonstrating a homogeneous morphology that represented a reinforcement for the feature. Fillers were weighed, gradually added to the experimental resin composite, and homogenized for one minute, forming three groups: BF (experimental high-viscosity bulk-fill resin composite; control), BF0.5 (experimental high-viscosity bulk-fill resin composite modified with 0.5% niobium oxyhydroxide fillers), and BFC (commercial bulk-fill resin composite Beautifil Bulk U, Shofu; positive control). In total, 10 specimens/groups (8 × 2 × 2 mm) underwent flexural strength (FS) tests in a universal testing machine (Instron) (500N). Resin composites were also assessed for Knoop hardness (KH), depth of cure (DoC), degree of conversion (DC), elastic modulus (E), and degree of color change (ΔE). The bioactive potential of the developed resin composite was evaluated after immersing the specimens into a simulated body fluid in vitro solution and assessing them using a Fourier-transformed infrared spectroscope with an attenuated total reflectance accessory. One-way ANOVA, followed by the Tukey’s test (p<0.05), determined FS, DC, KH, and ΔE. For DoC, ANOVA was performed, which demonstrated no significant difference between groups (p<0.05). Conclusions The high-viscosity bulk-fill resin composite with 0.5% niobium oxyhydroxide fillers showed promising outcomes as reinforcement agents and performed well for bioactive potential, although less predictable than the commercial resin composite with Giomer technology.

Resumo em Inglês:

Abstract Repositioning guides are commonly employed in clinical studies to ensure consistent tooth color measurements. Yet, their influence on measured color remains uncertain. Objective This study evaluated the impact of repositioning guides’ color and usage on tooth color measurement using a clinical spectrophotometer. Methodology In total, 18 volunteers participated in this study, in which the color of their upper left central incisor and upper left canine was measured with or without repositioning guides (control). The guides were made from pink, blue, or translucent silicone, as well as an acetate-based bleaching tray. Tooth color was measured in triplicates using a clinical spectrophotometer based on the CIELAB system. The standard deviations of these readings were used to estimate reproducibility, and color differences (ΔE00) between the measurements with guides and the control were calculated. Results Repositioning guides had a minimal effect on L* values and no effect on b* values. The use of pink silicone increased a* values, whereas blue or translucent silicone reduced them. Irrespective of the evaluated tooth, the lowest ΔE00 values were observed for the translucent silicone and bleaching tray. The usage of guides only affected data variability for the L* color coordinate. Conclusion Using repositioning guides can significantly impact the precision of tooth color measurement with a clinical spectrophotometer.

Resumo em Inglês:

Abstract Objective This study aimed to analyze the longitudinal bond strength of a universal adhesive and chemically characterize the dentin substrate under different acid etching protocols. Methodology Dentin samples were etched with polyacrylic acid 25% (PAA) for 10 seconds (n=3) and phosphoric acid 32% (PA) for 15 seconds (n=3) and analyzed by Fourier transform infrared spectroscopy – attenuated total reflectance (FTIR-ATR) before and after treatment. For collagen degradation, samples (n=12) were divided into 3 groups: PAA, PA, and Deionized water (control), and analyzed by the quantity of solubilized type I collagen C-terminal cross-linked telopeptides and solubilized C-terminal peptide in relation to total protein concentration (ICTPtp and CTXtp) and by their ultimate tensile strength (UTS). For the adhesive interface analysis, dentin samples (n=72) were divided into 3 groups: PAA, PA, and Self-etch (SE), and subdivided into 2 groups: 24 h (baseline) and 1 year. The following tests were performed: microtensile bond strength (μTBS) (n=48), scanning electron microscopy (SEM) (n=12), and nanoleakage (n=12). Results The FTIR of PAA showed lower reduction of the peaks in the phosphate group when compared to PA. For ICTPtp, PA showed a significantly higher value. For CTXtp, PA and PAA groups failed to statically differ from each other. UTS was significantly lower for PA. For μTBS, storage time significantly affected bond strength. The results were unaffected by the etching protocol. For SEM, after 1 year, PA had little evidence of degradation in the upper third of the adhesive interface in comparison to the other groups. Nanoleakage showed no considerable silver impregnation after 1 year in the SE group. Conclusion The use of PAA prior to a universal adhesive (when compared to PA) represents a less aggressive type of etching to dentin. However, self-etching still seems to be the best option for universal adhesive systems that have functional monomers in their composition.

Resumo em Inglês:

Abstract Denture biofilm acts as a potential reservoir for respiratory pathogens, considerably increasing the risk of lung infections, specifically aspiration pneumonia, mainly 48h after hospital admission. The establishment of a straightforward, affordable, and applicable hygiene protocol in a hospital environment for the effective control of denture biofilm can be particularly useful to prevent respiratory infections or reduce the course of established lung disease. Objectives To evaluate the anti-biofilm effectiveness of denture cleaning protocols in hospitalized patients. Methodology The maxillary complete dentures (MCDs) of 340 hospitalized participants were randomly cleaned once using one of the following 17 protocols (n=20): brushing with distilled water, toothpaste, or neutral liquid soap (controls); immersion in chemical solutions (1% sodium hypochlorite, alkaline peroxide, 0.12% or 2% chlorhexidine digluconate), or microwave irradiation (650 W for 3 min) combined or not with brushing. Before and after the application of the protocols, the biofilm of the intaglio surface of the MCDs was evaluated using two methods: denture biofilm coverage area (%) and microbiological quantitative cultures on blood agar and Sabouraud Dextrose Agar (CFU/mL). Data were subjected to the Wilcoxon and Kruskal-Wallis tests (α=0.05). Results All 17 protocols significantly reduced the percentage area of denture biofilm and microbial and fungal load (P<0.05). The highest percentage reductions in the area of denture biofilm were observed for 1% hypochlorite solution with or without brushing and for 2% chlorhexidine solution and microwave irradiation only in association with brushing (P<0.05). The greatest reductions in microbial and fungal load were found for the groups that used solutions of 2% chlorhexidine and 1% hypochlorite and microwave irradiation, regardless of the association with brushing (P<0.05). Conclusions A single immersion for 10 min in 1% sodium hypochlorite, even in the absence of brushing, proved to be a straightforward, rapid, low-cost, and effective protocol for cleaning the dentures of hospitalized patients.

Resumo em Inglês:

Abstract Objective the aim of this study was to analyze the influence of ozone therapy (OZN) on peri-implant bone repair in critical bones by installing osseointegrated implants in the tibia of ovariectomized rats. Methodology ovariectomy was performed on 30 Wistar rats, aged six months (Rattus novergicus), and, after 90 days, osseointegrated implants were installed in each tibial metaphysis. The study groups were divided into the animals that received intraperitoneal ozone at a concentration of 700 mcg/kg — OZ Group (n=15) — and a control group that received an intraperitoneal saline solution and, for this reason, was named the SAL group (n=15). The applications for both groups occurred during the immediate post-operative period on the 2nd, 4th, 6th, 8th, 10th, and 12th day post-surgery. At various stages (14, 42, and 60 days), the animals were euthanized, and tests were performed on their tibiae. These tests include histomorphometric and immunohistochemical analyses, computerized microtomography, sampling in light-cured resin for calcified sections, and confocal microscopy. The obtained data were then analyzed using One-way ANOVA and the Shapiro-Wilk, Kruskal-Wallis, and student t-tests (P<0.05). Results our findings indicate that the OZ group (3.26±0.20 mm) showed better cellular organization and bone neoformation at 14 days (SAL group, 0.90±1.42 mm) (P=0.001). Immunohistochemistry revealed that osteocalcin labeling was moderate in the OZ group and mild in the SAL group at 14 and 42 days post-surgery. The data from the analysis of calcified tissues (microtomography, histometric, and bone dynamism analysis) at 60 days showed no statistically significant differences between the groups (P=0.32). Conclusion it was concluded that ozone therapy anticipated the initial phases of the peri-implant bone repair process.

Resumo em Inglês:

Abstract Research would be important for obtaining a better understanding of voice complaints among patients with temporomandibular disorders (TMD). Objective The identification of predictors of voice disorders associated with TMD pain was made according to Diagnostic Criteria for TMD (DC/TMD) Axis I. Methodology Functional limitations were measured using the Jaw Functional Limitation Scales for mastication (JFLS-M), jaw mobility (JFLS-JM), and verbal and emotional expression (JFLS-VEE). Patients also completed the Hospital Anxiety and Depression Scale (HADS). The primary outcome was social-emotional and physical functioning as indicated by scores on the Voice-Related Quality of Life (V-RQOL) questionnaire. Multiple linear regression was used to model the relationship between the domains on the V-RQOL questionnaire and scores on the HADS and JFLS after adjusting for age, gender, DC/TMD diagnosis, pain intensity, and time since pain onset. Results The HADS-D (B=-1.15; 95% CI, -1.718 to -0.587; p<.001) and JFLS-VEE (B=-0.22; 95% CI, -0.40 to -0.06; p=.008) were significant predictors of scores on the V-RQOL questionnaire. Conclusion Higher scores on depression measures and limitations in verbal and emotional expression could exacerbate voice problems among TMD pain patients. Future research should promote multidisciplinary treatments for TMD pain-related voice disorders.

Resumo em Inglês:

Abstract Objective To determine whether intra-mucosal injection of injectable platelet-rich fibrin (i-PRF) can promote healing after Diode Laser Gingival Depigmentation (DLGD). Methodology A total of 20 arch sites of hyperpigmented gingiva of 10 patients underwent DLGD. For each patient, two arch sites were randomly assigned for either intra-mucosal injection of i-PRF (G1-i-PRF) (n=10 sites) or no treatment (G2-Control): (n=10 sites). Wound Healing Score (WHS), patient satisfaction, and Pigmentation Index (DOPI) were measured at 1 week and 1 and 3 months postoperatively. Histological assessment of tissue specimens was performed at baseline and 1 week. Results The percentage change in WHS at 1 week was significantly higher in G1 (58.34±15.43) compared to G2 (37.50±11.79). At day 1, 50% of patients in G1 were pain free compared with 75% in G2, who had mild pain. Mean DOPI decreased significantly at 3 months in both groups (P-value <0.001), without significant differences between groups. G1 specimens showed significantly higher epithelial thickness (P-value <0.001), as well as a higher number of blood vessels and less percentage of inflammatory cells. Conclusions i-PRF demonstrated better clinical and histological healing potential and less patient discomfort compared to sites without treatment after DLGD. Registered at https://clinicaltrials.gov/ as (NCT05283668).

Resumo em Inglês:

Abstract At low concentrations used for in-office bleaching gels, such as 6% HP, gingival barrier continues to be performed. If we take into account that, in the at-home bleaching technique, no barrier is indicated, it seems that the use of a gingival barrier fails to make much sense when bleaching gel in low concentration is used for in-office bleaching. Objective This double-blind, split-mouth, randomized clinical trial evaluated the gingival irritation (GI) of in-office bleaching using 6% hydrogen peroxide (HP) with and without a gingival barrier in adolescents, as well as color change and the impact of oral condition on quality of life. Methodology Overall, 60 participants were randomized into which side would or would not receive the gingival barrier. In-office bleaching was performed for 50 minutes with 6% HP in three sessions. The absolute risk and intensity of GI were assessed with a visual analogue scale. Color change was assessed using a digital spectrophotometer and color guides. The impact of oral condition on quality of life was assessed using the Brazilian version of the Oral Health Impact Profile (α=0.05). Results The proportion of patients who presented GI for the “with barrier” group was 31.6% and for the “without barrier” group, 30% (p=1.0). There is an equivalence for the evaluated groups regarding GI intensity (p<0.01). Color change was detected with no statistical differences (p>0.29). There was a significant impact of oral condition on quality of life after bleaching (p<0.001). Conclusions The use or not of the gingival barrier for in-office bleaching with 6% HP was equivalent for GI, as well as for bleaching efficacy, with improvement in the impact of oral condition on quality of life.

Resumo em Inglês:

Abstract Objective Platelet-rich fibrin (PRF) contains a variety of growth factors and bioactive molecules that play crucial roles in wound healing and angiogenesis. We aimed to evaluate the effects of PRF on tissue thickness and vascularization of the palatal donor site by ultrasound (USG) following subepithelial connective tissue harvesting. Methodology A subepithelial connective tissue graft was harvested from the palatal region with a single incision for root coverage in 20 systemically healthy patients. In the test group (n = 10), the PRF membrane was placed at the donor site, whereas no material was applied in the control group (n=10). Palatal tissue thickness (PTT) and pulsatility index (PI) were evaluated by USG at baseline and on the 3rd, 7th, 14th, 30th, and 90th days after surgery. The early healing index (EHI) was used to evaluate donor site healing for 30 days. Results PTT was significantly higher in the PRF group on the 3rd and 14th days after surgery when compared to the controls. In the PRF-treated group, PI levels were significantly higher than in the controls, especially on the 14th day. PTT increased significantly 90 days after surgery compared to the test group baseline, but controls showed a significant decrease. The PRF group showed statistically significant improvements in EHI scores compared to controls on days 3, 7, and 14. This study found a negative correlation between PI values and EHI scores on postoperative days three and seven in the test group. Conclusion USG is a non-invasive, objective method to radiographically evaluate the regenerative effects of PRF on palatal wound healing after soft tissue harvesting. To overcome graft inadequacy in reharvesting procedures, PRF application may enhance clinical success and reduce possible complications by increasing tissue thickness and revascularization in the donor area.

Resumo em Inglês:

Abstract Studies evaluating the roughness, wettability and microbial adhesion of 3D-printed resins for complete denture bases and teeth are scarce. Objective This study evaluated the surface roughness, wettability and adhesion of multispecies biofilms (Candida albicans, Staphylococcus aureus and Streptococcus mutans) on 3D-printed resins for complete denture bases and teeth compared to conventional resins (heat-polymerized acrylic resin; artificial pre-fabricated teeth). Methodology Circular specimens (n=39; 6.0 mm Ø × 2.0 mm) of each group were subjected to roughness (n=30), wettability (n=30) and biofilm adhesion (n=9) tests. Three roughness measurements were taken by laser confocal microscopy and a mean value was calculated. Wettability was evaluated by the contact angle of sessile drop method, considering the mean of the three evaluations per specimen. In parallel, microorganism adhesion to resin surfaces was evaluated using a multispecies biofilm model. Microbial load was evaluated by determining the number of Colony Forming Units (CFU/mL) and by scanning electron microscopy (SEM). Data were subjected to the Wald test in a generalized linear model with multiple comparisons and Bonferroni adjustment, as well as two-way ANOVA (α=5%). Results The roughness of the conventional base resin (0.01±0.04) was lower than that of the conventional tooth (0.14±0.04) (p=0.023) and 3D-printed base (0.18±0.08) (p<0.001). For wettability, conventional resin (84.20±5.57) showed a higher contact angle than the 3D-printed resin (60.58±6.18) (p<0.001). Higher microbial loads of S. mutans (p=0.023) and S. aureus (p=0.010) were observed on the surface of the conventional resin (S. mutans: 5.48±1.55; S. aureus: 7.01±0.57) compared to the 3D-printed resin (S. mutans: 4.11±1.96; S. aureus: 6.42±0.78). The adhesion of C. albicans was not affected by surface characteristics. The conventional base resin showed less roughness than the conventional dental resin and the printed base resin. Conclusion The 3D-printed resins for base and tooth showed less hydrophobicity and less adhesion of S. mutans and S. aureus than conventional resins.

Resumo em Inglês:

Abstract Oral soft tissue lesions require a precise diagnosis by oral biopsy with the ability to recognize these lesions within histopathological levels, so the instrument used for the incisions should be safe and cause little to no harm to the surrounding tissue. Objective This study compared a dual-wavelength diode laser and an Er, Cr:YSGG laser in oral soft tissue incisions to determine the most effective and safest laser system at the histopathological level. Methodology The (810 and 980 nm) dual-wavelength diode laser was used at 1.5 W and 2.5 W (CW) power settings, and the (2780 nm) Er, Cr:YSGG laser was used at 2.5 W and 3.5 W (PW) power settings. Both laser systems were used to incise the tissues of freshly dissected sheep tongue pieces to obtain the following histopathological criteria: epithelial tissue changes, connective tissue changes, and lateral thermal damage extent by optical microscopy. Results The epithelial and connective tissue damage scores were significantly higher in the dual-wavelength diode laser groups than in the Er, Cr:YSGG laser groups (P<0.001), and there was a significant difference between some groups. The extent of lateral thermal damage was also significantly higher in the diode laser groups than in the Er, Cr: YSGG laser groups (P<0.001), and there was a significant difference between groups. Group 2 (2.5 W) of the diode laser was the highest for all three criteria, while group 3 (2.5 W) of the Er, Cr:YSGG laser was the lowest. Conclusion The Er, Cr:YSGG laser with an output power of 2.5 W is, histologically, the most effective and safest laser for oral soft tissue incision. The dual-wavelength diode laser causes more damage than the Er, Cr:YSGG laser, but it can be used with a low output power and 1 mm safety distance in excisional biopsy.

Resumo em Inglês:

Abstract Objective To evaluate whether antimicrobial photodynamic therapy (aPDT) repairs bisphosphonate-related osteonecrosis of the jaw (BRONJ) modulated by the reduction of NF-kB protein in a murine model. Methodology Male Wistar rats (N=30) were divided into the following groups (n=6/group): negative control (NC); experimental osteonecrosis (ONE); ONE + photosensitizer (PS); ONE + photobiomodulation (PBM); and ONE + aPDT. Over 8 weeks, ONE was induced by zoledronic acid 250 µg/kg injections, except in the NC group, which received sterile 0.9% saline, followed by extraction of the lower left first molar. Red light laser irradiation (wavelength ~660 nm, power 50 mW, energy of 2 J, energy dose of 66.67 J/cm2 for 40 s) was performed once a week for 4 weeks. Methylene blue 0.3% was used as PS. The animals were euthanized and examined macroscopically for the presence of exposed bone and epithelial repair and microscopically by histochemical (hematoxylin-eosin and Masson’s trichrome staining) and immunohistochemical (anti-NF-kB) methods. Macroscopic and histomorphometric data were analyzed by one-way ANOVA and Tukey’s post-test (p<0.05). Results Mucosal repair, viable osteocytes, and NF-kB immunostaining were observed in the NC, ONE+PS, ONE+PBM, and ONE+aPDT groups. The ONE group showed no mucosal repair, showing empty lacunae and multifocal immunostaining for NF-kB. The ONE+PBM and ONE+aPDT groups had greater deposition of extracellular matrix and less necrotic bone tissue (p<0.05). Conclusion PBM and aPDT treatments for BRONJ were effective for bone and epithelial repair, in addition to reducing inflammation mediated by the decrease of NF-kB protein in the irradiated regions.

Resumo em Inglês:

Abstract Specific products containing natural resources can contribute to the innovation of complete denture hygiene. Objective: To conduct an in vitro evaluation of experimental dentifrices containing essential oils of Bowdichia virgilioides Kunth (BvK), Copaifera officinalis (Co), Eucalyptus citriodora (Ec), Melaleuca alternifolia (Ma) and Pinus strobus (Ps) at 1%. Methodology: The variables evaluated were organoleptic and physicochemical characteristics, abrasiveness (mechanical brushing machine) simulating 2.5 years, and microbial load (Colony Forming Units - CFU/mL), metabolic activity (XTT assay) and cell viability (Live/Dead® BacLight™ kit) of the multispecies biofilm (Streptococcus mutans: Sm, Staphylococcus aureus: Sa, Candida albicans: Ca and Candida glabrata: Cg). Specimens of heat-polymerized acrylic resins (n=256) (n=96 specimens for abrasiveness, n=72 for microbial load count, n=72 for biofilm metabolic activity, n=16 for cell viability and total biofilm quantification) with formed biofilm were divided into eight groups for manual brushing (20 seconds) with a dental brush and distilled water (NC: negative control), Trihydral (PC: positive control), placebo (Pl), BvK, Co, Ec, Ma or Ps. After brushing, the specimens were washed with PBS and immersed in Letheen Broth medium, and the suspension was sown in solid specific medium. The organoleptic characteristics were presented by descriptive analysis. The values of density, pH, consistency and viscosity were presented in a table. The data were analyzed with the Wald test in a generalized linear model, followed by the Kruskal-Wallis test, Dunn's test (mass change) and the Bonferroni test (UFC and XTT). The Wald test in Generalized Estimating Equations and the Bonferroni test were used to analyze cell viability. Results: All dentifrices showed stable organoleptic characteristics and adequate physicochemical properties. CN, Ec, Ps, Pl and PC showed low abrasiveness. There was a significant difference between the groups (p<0.001) for microbial load, metabolic activity and biofilm viability. Conclusions: It was concluded that the BvK, Ec and Ps dentifrices are useful for cleaning complete dentures, as they have antimicrobial activity against biofilm. The dentifrices containing Bowdichia virgilioides Kunth showed medium abrasiveness and should be used with caution.