Simultaneous removal of organic material, nitrogen and phosphorus in a reactor in batches of mobile bed biofilm sequencing by the anaerobic-anoxic-oxic process

ABSTRACT

In this study, the performance of a reactor in sequential batch with mobile bed biofilm operated by the anaerobic-anoxic-oxic (A²O) process, applied to the simultaneous removal of organic material, nitrogen and phosphorus from sanitary sewage was evaluated. Two reactors with a useful volume of 36 liters each were used, one of them receiving Kaldnes^® type mobile plastic rings, with a specific surface area estimated at 310 m²/m³, which occupied 50% of the reactor’s useful volume (MBSBBR). The study was conducted with 12-day solid retention time (SRT), 6 hour hydraulic retention time (HRT), food/microorganism (F/M) ratio of 0.4 to 0.5 gCOD/VSS.d, dissolved oxygen (DO) in the range of 0.3-0.8 mgO₂/L and application rates of organic load, nitrogen and phosphorus of 47.2 gCOD/L.d, 5.4 gTNK/L.d and 0.4 gP/L.d, respectively. The efficiency of chemical oxygen demand (COD), N-NH₃ and Phosphorus removal was of 91.1%, 90.5% and 85.4% for the MBSBBR reactor and 89.5%, 91.6% and 84.4% for the RBS reactor, respectively. The results of the statistical ANOVA test were applied to the main variables studied and the values converged to values of f _observed < f _critical . In this way, it is considered that there was a similarity of performance between the MBSBBR and RBS reactors. It is concluded that the introduction of the support medium did not bring benefits to the treatment in terms of nutrient removal. However, the study showed that it is possible to obtain high nitrogen removal at low concentrations of DO, which is advantageous for the sewage treatment with high nitrogen concentration.

Keywords:
anaerobic-anoxic-oxic; attached and suspended biomass; removal of nitrogen and phosphorus; simultaneous nitrification and denitrification; sanitary sewer