ABSTRACT:
This study evaluated the effects of thermal modification at different temperatures and for different durations on the mechanical strength of wood of selected species from an agroforestry system. To this end, three 9-year-old (approximate age) individuals, each from four species of forest trees-Parapiptadenia rigida (Benth.) Brenan, Peltophorum dubium (Spreng.) Taub., Eucalyptus grandis × Eucalyptus urophylla hybrid, and Schizolobium parahyba (Vell.) Blake-were evaluated. After obtaining initial measurements, samples from the four species under went heat treatment for 2 h and 4 h and were subsequently subjected to heat using an oven at temperatures 120°C, 150°C, 180°C, and 210°C; respectively, in addition to the control. For evaluating mechanical strength, the technical standard ASTM D 143-94 was used to obtain the values of the moduli of elasticity and rupture, tension at the proportional limit, and maximum force of the subjects. It was observed that different durations and temperatures altered the mechanical strength of the wood of the four species studied. The 2 h residence time is the most recommended for conducting thermal modification. This procedure modifies the mechanical resistance of wood in a positive manner, with exposure temperatures ranging between 120 ºC and 180 ºC being the most recommended. The thermal treatment carried out for 4 h is not recommended for structural purposes because of the decrease in flexural strength.
Key words:
static bending; thermal modification; wood quality
Thumbnail
Thumbnail
