This study was aimed at employing response surface methodology (RSM) for optimization of process variables and identifying optimal conditions for the adsorption of bromate (BrO3-) from contaminated water using multi-walled carbon nanotubes, based on iron hydr(oxide), Fe-CNTs nanocomposite. Fifteen experimental runs were conducted in batch mode to study the effect of individual as well as interactive process variables, i.e., pH, BrO3- initial concentration, and adsorbent dose, on the removal of BrO3- using Box-Behnken design (BBD) of RSM. The coefficient of determination (R²) at 98.34% indicated a good agreement between actual and predicted values. The main effect and contour plot were drawn to obtain the independent and interactive effect of operational variables on BrO3- uptake. A process optimization curve was drawn to determine the optimum operating conditions that lead to a desirable response. The optimum conditions for BrO3- adsorption using Fe-CNTs nanocomposite were found to be pH 2.0, initial BrO3- concentration of 10.0 mg/L, and adsorbent dose of 0.010 g per 50 mL solution.

ABSTRACT: Two analytical methods were developed, one utilizing sensitive UPLC-MS/MS method while other being the spectrophotometric method exploiting the Dushman reaction. Both methods were validated based on ICH guidelines and were successfully applied to quantitate the drug in marketed formulation. UPLC-MS/MS method responded linearly in the range of 1.6 µgmL-1-6.4 µgmL-1 while spectrophotometric procedure followed the Beer’s law in the concentration range of 30-100 µgmL-1. UPLC-MS/MS has been found to have a limit of quantitation of 0.97 µgmL-1 while spectrophotometric method was found to quantitate 14.00 µgmL-1 correctly with high precision. Both the methods showed an excellent recovery of 99.36%-100.91% (% RSD 1.05-1.73) and 98.64%-99.73% (%RSD 0.67-1.68) for UPLC-MS/MS and spectrophotometric, respectively.

Abstract The research article is based on biodiesel synthesis by the transesterification of waste cooking oil with methanol in the presence of heterogeneous catalysts prepared from different marble. Eight samples of marble were successfully converted into potential catalysts by calcination. The thermal treatment of waste marbles at 300oC-1000oC converted the metal carbonates (CaCO3) to metal oxides (CaO). The calcined marble was analyzed by chemical tests, flame atomic absorption spectroscopy (FAAS), Fourier transform infrared spectroscopy (FT-IR), and X-ray diffraction studies (XRD). The presence of CaO in these catalysts made them highly reactive for biodiesel synthesis. The basicity and percentage of calcium in marble catalysts were calculated to know their basic strength. The transesterification was performed by fast stirring using waste cooking oil, methanol and nine different types of marble catalysts for 5 min at five different conditions, i.e., room temperature, hot plate stirring, solar ordinary irradiations, solar concentrated reflected irradiations and solar concentrated refracted irradiations. The solid catalysts were easily separated from the product for re-use. All marble catalysts were found to be active and basic except one namely silver pun (I). The production of biodiesel was confirmed by ASTM standards, TLC examination and by gas chromatography (GC).

New Analytical method has been developed for the determination of Cefuroxime in pharmaceutical formulations. The method involves the application of high performance Liquid chromatography (HPLC) for the quantitative analysis of cefuroxime. HPLC method has a shorter analysis time of 10 min. The developed method obeyed the Beer's law in the range of 5- 300 μg mL-1. Limit of detection (LOD) and limit of quantitation (LOQ) of the developed method was found to be 0.538 and 1.63, μg mL-1 respectively.